Three different well-known pumpkins – 3d scanned and incorporated into bowls that resemble a cut-open real one. The cut in the center is intentionally designed so that the parts only fit in one way – to make the stacking easy. You can scale this design freely and print it as big as you want. The default size is the size of the actual pumpkins that I 3d scanned.
Instructions
- Print all parts
- Glue the stems into the top parts.
- Enjoy!
Print settings Required build volume: 130 x 130 x 150 m Material usage: about 160g per pumpkin
Material: PLA Print direction: stls are rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Outer walls: 3 Infill: 15% Build plate adhesion type: none
Categories:
35 Likes94 DownloadsSeptember 25, 2024