Paper towel holder print-in-place

A quick and easy paper towel holder. The design is print-in-place and uses very little material. The roll is easily inserted and removed.

Two versions are included with different tolerance: 0.3 and 0.5 mm. The 0.3 mm version is the default, use the 0.5 mm version if the dimensional accuracy of your machine is bad.

Instructions:

• Print the two parts
• Glue it on the wall with 3M tape or wall - mount glue and use a paper towel roll for distance measuring.

Print settings Required build volume: 120 x 120 x 20 mm Material usage: 30g Print time: 3h

Material: PLA Print direction: stls are rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Outer walls: 3 Infill: 20% Build plate adhesion type: none