An extravagant picture frame for a special photo. The mushrooms are 3d-scanned “trametes pubescens” that I found in the forest. There is a vertical and horizontal version included that both work as wall mount, fridge magnet and tabletop display.
Versions
- For horizontal display
- For vertical display
Framing options
- European standard photos in the size 100 x 150 mm -European post cards in the size 104 x 148 mm
- US photos and post cards in the size 4x6 inch
Mounting options
- With the holder for tabletop display
- With 6 x 2 mm magnets on the fridge
- With a nail or wall mount tape on your wall
Instructions
- Choose the horizontal or vertical version based on what you want to frame
- Print the frame and lid
- Print the extra holder if you want to display it on a tabletop
- Slide in your photo
- Slide in the lid until it locks into place
Print settings Required build volume: 240 x 240 mm x 100 mm Material usage: 150 g Material: PLA Print direction: stls are rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Outer walls: 3 Infill: 15% Build plate adhesion type: A brim for the holder, all other parts none
Categories:
47 Likes99 DownloadsAugust 15, 2024