tracking pixel
gazzaladra

Mushroom garden decoration “Boletus Edulis”

by
gazzaladra
Follow
Follow
Remix Model
gazzaladra
gazzaladra
|
Image 3 of 6
Mushroom garden decoration “Boletus Edulis” 3d model
gazzaladra
gazzaladra
|
Image 3 of 6
Mushroom garden decoration “Boletus Edulis” 3d model
2D
3D
Makes
instagram-play
Mushroom garden decoration “Boletus Edulis” 3d model
Mushroom garden decoration “Boletus Edulis” 3d model
Mushroom garden decoration “Boletus Edulis” 3d model
Mushroom garden decoration “Boletus Edulis” 3d model
Mushroom garden decoration “Boletus Edulis” 3d model
Mushroom garden decoration “Boletus Edulis” 3d model
This model is restricted by licensing terms. 

A cute little decoration for your planter or garden sculpted after the mushroom “boletus edulis”. Plug the pin into the mushroom and you are ready to go!

Scaling / size

  • Regular size assembled (100%): 20 x 20 x 40 mm
  • Upscaling: you can scale this design up as big as you want in. The pin is designed to work with a slanted friction fit that continues working when scaled. I printed it in 100, 140, 150, 160 and 200%
  • Downscaling: this is already at the size edge of fdm printing – you can try it out though.

Print settings Material usage: just a few grams depending on your print size. Perfect for filament left overs.

Material: PLA Print direction: stls are rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,1 – 0.2 mm Outer walls: 3 Infill: 15% Build plate adhesion type: none


48 Likes68 DownloadsFebruary 19, 2024


48 Likes68 DownloadsFebruary 19, 2024
This model is restricted by licensing terms.