gazzaladra

Forest Chess set

by
gazzaladra
Follow
Follow
Remix Model
gazzaladra
gazzaladra
|
Image 11 of 25
Forest Chess set 3d model
gazzaladra
gazzaladra
|
Image 11 of 25
Forest Chess set 3d model
2D
3D
Makes
Forest Chess set 3d model
Forest Chess set 3d model
Forest Chess set 3d model
Forest Chess set 3d model
Forest Chess set 3d model
Forest Chess set 3d model
Forest Chess set 3d model
Forest Chess set 3d model
Forest Chess set 3d model
Forest Chess set 3d model
Forest Chess set 3d model
Forest Chess set 3d model
Forest Chess set 3d model
Forest Chess set 3d model
Forest Chess set 3d model
Forest Chess set 3d model
Forest Chess set 3d model
Forest Chess set 3d model
Forest Chess set 3d model
Forest Chess set - Works great with two-color filament give the 'shrooms magical vibe and added magnets for stability. - 3d model
Forest Chess set 3d model
Forest Chess set - I used transparent PETG for the hinges since PLA filament tend to get brittle and break over time, i have noticed that the 8 log pieces stand more than the other, so the last row is a bit inclined... Other than this great model i really love it. I would added magnets on the caps also :P can't wait to show it to my friends hehe


PolyTerra Earth Brown
PolyTerra Muted Green
PolyTerra Muted White
Overture Matte Light Brown
Overture Silk Copper
Eryone Clear PETG - 3d model
Forest Chess set 3d model
Forest Chess set 3d model
Forest Chess set 3d model
This model is restricted by licensing terms. 

This is a collaborative project by ForgeCore and me.

A unique chess set for all nature lovers. This set consists of a foldable board that rolls up into a portable log and figures that are all based on different mushroom species. An acorn playing figure to play checkers is also included!

Log: Pinus Sylvestris Pawn: Boletus edulis Rooks: Lentinula edodes Knight: Morchella esculenta Bishop: Pleurotus eryngii Queen: Amanita muscaria King: Cantharellus cibarius

Instructions chess pieces

  • You can scale the figures up if you want them to be bigger
  • Print all parts in the according amount and in two colors
  • Glue the top of the queen and rooks onto their respective bottom

Instructions log V1 Instructions

  • Print all 8 log pieces in one color
  • Print 32 of the squares in another color
  • Print the top and bottom in either the same color as the log pieces or for multi-color caps please use the provided 3MF file
  • Cut up strings of filament that are slightly longer than the log and sharpen them on one end with a knife or cutter
  • Connect the log pieces with the strings by inserting them with the pointy end
  • Cut off the string ends
  • Glue in all squares
  • Glue in 6 5mm magnets in the holes in log part 1 and 8 - make sure to have them face the right direction (optional but recommended)

V2 Instructions

  • Print in place using multicolor

  • Needs 256x256 bed size

  • May not work in Orca Slicer

  • Have fun!

Print settings Material: PLA Print direction: stls are rotated correctly Nozzle size: 0,4 mm Line width: 0,4 mm Infill: 15%

Board Layer height 0,2 mm Support: One the log pieces 1-8 need support. Only “touching build plate”, 20 degree “threshold angle”. (in Cura the number is calcuted 90-20 – so put 70 in “Support overhang angle”)

Chess pieces Support: none Layer height 0,08 mm Build plate adhesion type: none

Checkers acorn Support: none Layer height 0,08 mm Build plate adhesion type: brim


1.2K Likes382 DownloadsJune 6, 2024


1.2K Likes382 DownloadsJune 6, 2024
This model is restricted by licensing terms.