tracking pixel
gazzaladra

Egg cup “Avocado”

by
gazzaladra
Follow
Follow
Remix Model
2D
3D
Makes
Egg cup “Avocado” 3d model
Egg cup “Avocado” 3d model
Egg cup “Avocado” 3d model
Egg cup “Avocado” 3d model
Egg cup “Avocado” 3d model
Egg cup “Avocado” 3d model
This model is restricted by licensing terms. 

A cute egg cup with extra space for the cut off top. I always disliked having the shell pieces on my plate when having breakfast, so I designed a egg cup that can hold everything in place.

Just glue the two parts together and you are ready to go.

Size assembled: 96 x74 x 32 mm

Print settings Material usage per cup: 50g Print time per cup: 4h

The Peel: This part should be printed “upside down” (as in the images) to get a better surface texture and overhang quality. If your printer refuses to produce decent bridging results - you can use support as backup solution. If it struggles with bed adhesion - you can use a brim or print in the other way round.

Material: PLA Print direction: stls are rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Outer walls: 3 Infill: 15% Build plate adhesion type: none


24 Likes63 DownloadsJune 15, 2023


24 Likes63 DownloadsJune 15, 2023
This model is restricted by licensing terms.