By confirming your subscription, you allow Thangs to charge your card for this payment and future payments in accordance with their terms. You can always cancel your subscription.
A cute egg cup with extra space for the cut off top.
I always disliked having the shell pieces on my plate when having breakfast, so I designed a egg cup that can hold everything in place.
Just glue the two parts together and you are ready to go.
Size assembled: 96 x74 x 32 mm
Print settings
Material usage per cup: 50g
Print time per cup: 4h
The Peel: This part should be printed “upside down” (as in the images) to get a better surface texture and overhang quality. If your printer refuses to produce decent bridging results - you can use support as backup solution. If it struggles with bed adhesion - you can use a brim or print in the other way round.
Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Outer walls: 3
Infill: 15%
Build plate adhesion type: none
