Comb

**An ergonomic, robust and elegant comb. ** The handle is flexible and rounded of for a pleasing usage and big enough for a good grip.

Size: 190 x 30 x 16,5 mm

Print settings Required build volume: 170 x 170 x 20 mm (for small build plates it can be rotated by 45 degrees) Material usage: 20g Print time: 2h

Material: PLA Print direction: stls are rotated correctly Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Outer walls: 3 Infill: 15% Build plate adhesion type: none