tracking pixel
gazzaladra

Bulletin board

by
gazzaladra
Follow
Follow
Remix Model
gazzaladra
gazzaladra
|
Image 5 of 9
Bulletin board 3d model
gazzaladra
gazzaladra
|
Image 5 of 9
Bulletin board 3d model
2D
3D
Makes
Bulletin board 3d model
Bulletin board 3d model
Bulletin board 3d model
Bulletin board 3d model
Bulletin board 3d model
Bulletin board 3d model
Bulletin board 3d model
Bulletin board 3d model
Bulletin board 3d model
This model is restricted by licensing terms. 

A quick and easy-to-print board for your photos and notes. The board is modular in size

Versions included:

  • Clip_stronger: The default strong clip
  • Clip_weaker: A little weaker clip with the purpose to not leave marks on photos or thin paper.
  • Board_nails_tape: The board intended to be fixed on the wall with either nails or wall mount glue/tape.
  • Board_magnets: The board intended to be fixed with 5x3mm magnets.

Size of one board module: 195 x 165 x10 mm

Print settings Required build volume: 200 x 200 x 30 mm Material usage: 12g per board, 5g per clip Print time: 1,5h per board, 25min per clip

Material: PLA Print direction: stls are rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Outer walls: 5 (2mm thickness) Top/Bottom Layers: 6 (1,2mm thickness) Infill: 30% Build plate adhesion type: none


42 Likes37 DownloadsJune 8, 2023


42 Likes37 DownloadsJune 8, 2023
This model is restricted by licensing terms.