Bulletin board

A quick and easy-to-print board for your photos and notes. The board is modular in size

Versions included:

• Clip_stronger: The default strong clip
• Clip_weaker: A little weaker clip with the purpose to not leave marks on photos or thin paper.
• Board_nails_tape: The board intended to be fixed on the wall with either nails or wall mount glue/tape.
• Board_magnets: The board intended to be fixed with 5x3mm magnets.

Size of one board module: 195 x 165 x10 mm

Print settings Required build volume: 200 x 200 x 30 mm Material usage: 12g per board, 5g per clip Print time: 1,5h per board, 25min per clip

Material: PLA Print direction: stls are rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Outer walls: 5 (2mm thickness) Top/Bottom Layers: 6 (1,2mm thickness) Infill: 30% Build plate adhesion type: none