tracking pixel
Evan P

Drawer for Quartet GDP186 desktop dry erase board

by
flowmage
Follow
Follow
Remix Model
flowmage
flowmage
|
Image 1 of 4
Drawer for Quartet GDP186 desktop dry erase board 3d model
flowmage
flowmage
|
Image 1 of 4
Drawer for Quartet GDP186 desktop dry erase board 3d model
2D
3D
Makes
Drawer for Quartet GDP186 desktop dry erase board 3d model
Drawer for Quartet GDP186 desktop dry erase board 3d model
Drawer for Quartet GDP186 desktop dry erase board 3d model
Drawer for Quartet GDP186 desktop dry erase board 3d model

Disappointed that your GDP186 desktop dry erase pad only came with a single drawer, when it very obviously could fit two? Print another one!

Printing

Printed with supports on build plate (for the handle overhangs) in Inland PLA. I used 3 walls and 10% infill at 0.2mm. It would be fine with standard 0.2mm or 0.3mm layer height settings. Drawer

GDP186_drawer.stl is a faithful rebuild of the original drawer shape, minus the internal dividers. If you just need another drawer, this is the one for you.

Gridfinity Drawer

I recommend the GDP186_drawer_gridfinity_centered.stl file!

The back grid sets fit up to 3U tall Gridfinity boxes. 4U might fit - but will be tight at the front. This is best used for boxes that store their items entirely internally - items that stick up will prevent the drawer from hiding under the surface. The front grid slots are pretty short - 1U at the front.

There is an option to not center the grid, which leaves some open space on the right. If you have a specific use for that space, go for it.

Customization - OpenSCAD

Parameters for all dimensions are available in the GDP186_drawer.scad file. You'll need two libraries to get this to build:


4 Likes9 DownloadsJanuary 12, 2023



4 Likes9 DownloadsJanuary 12, 2023