ALL Flexi Factory designs are protected by Copyright Law. When you purchase, you do NOT have the right to sell any digital file or printed model of my designs without my explicit written consent.

To legally sell PRINTED models, monthly ACTIVE membership and a Seller Authorization form is required through one of two available platforms below:

https://linktr.ee/flexifactory

Please help support the creative work of each 3D artist and NEVER share or sell a digital file.

This Spacemoji (emoji astronaut) is an articulated Mostly print-in-place model that needs NO supports.

I say "mostly" because the Jetpack is printed separate and locks into his back just by pushing it in. The character stands, and has a two-faced happy /mad emoji face and a retractable Ray gun, plus a stand that makes it look like it is launching into space. With all of these separate items... you really have the ability to switch around colors.

Included are 5 files: -Spacemoji -Jetpack -Stand -Compact stand -Colored Bambu/Prusa .3mf file

Also Optimized for AMS, meaning if you are using a Bambu or Prusa with multiple colors, you should easily be able to use the fill tool for coloring. I have added a 3mf as well for convenience!

Like with all my Flexi's, I went through many iterations to make sure it was strong, and easy to print without supports.

Please feel free to share images of your prints on this page, I would love to see 'em.

Thank you.

P.S. If you like this design, Check out my other models.

https://thangs.com/designer/flexifactory

Affiliate link to my supplies used in the photos above can be found here: https://www.amazon.com/shop/flexifactory

*As an Amazon Associate I earn from qualifying purchases.

3D printing settings Easy Print. Can be scaled

-No Supports (adding supports will hinder functionality) Print tips and Info:

STL and 3MF files are included. * If you use the 3mf file, please remember that it is a painted project file for your convenience. You must check your material/printer/settings to make sure it works correctly for your printing project. (For easy printing, just change your ams color pallet instead of opening the painter.)

I print with 3 walls, 15% infill/gyroid, .12 or .16 layer height for quality.

I test print between 50% and 150% for functionality and printability. Small parts can be fragile, especially with some silks.

Gradient PLA works well with this Print-in-place model with separate stand and accessories