This Flexi Skeleton Triceratops is an articulated print-in-place model that needs NO supports.

There are several versions to choose from:

• Straight with eyes
• Straight with NO eyes
• Curved for larger prints with eyes
• Curved with NO eyes
• Stand
• All of the above painted for Prusa and BambuLab slicers

Also Optimized for AMS, meaning if you are using a Bambu Printer with multiple colors, you should easily be able to use the fill tool for coloring. I have added a 3mf as well for convenience!

Like with all my Flexi's, I went through many iterations to make sure it was strong, and easy to print without supports.

Please feel free to share images of your prints on this page, I would love to see 'em.

Thank you.

P.S. If you like this design, Check out my other models.

https://thangs.com/designer/flexifactory

ALL Flexi Factory designs are protected by Copyright Law. When you purchase, you do NOT have the right to sell any digital file or printed model of my designs without my explicit written consent.

To legally sell them, you may obtain my permission through this link: https://linktr.ee/flexifactory

Please help support the creative work of each 3D artist and NEVER share or sell a digital file.

3D printing settings Easy Print

*No Supports (adding supports will hinder functionality) *15% infill *I always like to use 3 walls *PLA works best *make sure you have good adhesion, especially for printing small (personally I like to use an Elmer's disappearing purple glue stick)

*If printing small, it's best to use the straight version. They are the same model, but the curved version has tighter tolerances in the tail that may stick a little if printed small.