This Flexi Shark is an articulated "mostly" print-in-place model that needs NO supports. I say "mostly" because the head prints separately and then you just snap it on.

Included: *body (this is the standard straight body) *body Curved (Use this one if you want to print it LARGE) *Head (Standard head) *Head Looser (If you find that the standard head fits too tight) *3MF Project Files

*I provided a looser version because depending on how your printer is calibrated, the standard may be too tight.

*I recommend only printing with the curved version if you are printing bigger then the plate will allow for the straight one. The reason for this is the tolerances are tighter.

Also Optimized for AMS, meaning if you are using A Bambu or Prusa with multiple colors, you should easily be able to use the fill tool for coloring.

Like with all my Flexi's, I went through many iterations to make sure it was strong, and easy to print without supports.

Please feel free to share images of your prints on this page, I would love to see 'em.

Thank you.

P.S. If you like my Flexi Shark, Check out my other models.

https://thangs.com/designer/flexifactory

ALL Flexi Factory designs are protected by Copyright Law. When you purchase, you do NOT have the right to sell any digital file or printed model of my designs without my explicit written consent.

To legally sell them, you may obtain my permission through this link: https://linktr.ee/flexifactory

3D printing settings Easy Print

*No Supports (adding supports will hinder functionality) *" Mostly" Print-in-place (some assembly required)) *15% infill *I always like to use 3 walls *PLA works best

*I provided a looser version because depending on how your printer is calibrated, the standard may be too tight.

*I recommend only printing with the curved version if you are printing bigger then the plate will allow for the straight one. The reason for this is the tolerances are tighter.