Low Poly Farmers designed for Loyal Moses's BMR 2021 Christmas Community Print Drive to help print and ship free gifts to families and children all over the world this Christmas season.

Prints without supports.  Models in the photos were printed in Paramount3D Teal PLA on a Prusa Mini+ at 0.25 Layer Height with 4 perimeters and 25% infill. 

 Low Poly Farmers

Fixumdude-Farmer-Girl_003.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5017132.

Star Wars faces for thjelmfelt's Jack O'Lantern with Snap On Faces https://www.thingiverse.com/thing:2590046

As seen on Chris Pirillo's twitch stream early Oct 2021

Models should print without supports. To be used with the awesome snap on face pumpkin system created by thjelmfelt.

Star Wars Face Assortment for Jack O'Lantern with Snap On Faces by thjelmfelt

This model was [featured on the 3D Printing Nerd!](https://www.youtube.com/watch?v=XasxSY-Zbnc)

Be sure and Check out this awesome [video by 3D Chill with super clear assembly instructions!](https://www.youtube.com/watch?v=o4vy2UAYu1s&feature=youtu.be)

Inspired by benzz88's millennium falcon kit card, but more roughly to scale with the x-wing, y-wing and tie fighter models we've been collecting at the office.  

This was designed to snap together when printed on my homemade hypercube300 printer which apparently overextruded quite a bit, so you may have to adjust the holes, or use a little glue depending on how dialed in your printer is. 

**Print Settings**
Printer: Hypercube300

Rafts: No

Supports: No

Resolution: 0.1

Infill: 20%

Filament: Hatchbox PLA Gray 
 

**Notes:**
I printed mine low and slow to get the most detail.

Speed: 25mm/s
Temp: 195C
Layer Height: 0.1mm
Heated Bed: 60C
Filament: Hatchbox PLA Cool Gray

**Post-Printing**
There is a lot of surface area in contact with the bed, so remove carefully if you want to keep the card intact for gifting to others. An assembly instruction pdf is included to help with putting it all together.

Printed card is 180mm X 170mm to fit on 200mm X 200mm printers.
Assembled Model is roughly 120mm X 85mm.

Star Wars Millennium Falcon Kit Card by Fixumdude

Millennium Falcon Kit Card by Fixumdude

My niece and nephew love flexi animals, but we couldn't find a good monkey, so I designed one for them.  It's a happy little monkey with flexible arms, legs, and neck. He also has a super flexible tail he can use to swing with or hang onto things.

The face, hands, and feet are a little bit higher than the rest of the body to allow for a color change for the last few layers to give him even more personality.

Flexi Articulated Monkey

Thank you for your support. You are an awesome dude! 

While a member of the Awesome Dude, you have access to exclusive members only models. Oh, and occasionally there will be fun stickers which are only available to members.

Thanks again for your support.

Awesome Dude Tier

This plan gives you the right to sell physical prints of any the Fixumdude  models available on the Thangs website during your active membership. 

You also get access to a library of exclusive designs.

Consent to sell applies only to physical models. Sale or hosting of any file, or sharing of commercial tier model files is expressly forbidden.

Use of any of my 3D models to promote products or services other than the design itself are also forbidden.


Commercial Tier

Fun earrings featuring a loaded crunchy taco!

Color your own taco then print 2 copies, or use the included per-colored bambu studio project file.

Printed in 4 colors with standard 0.2mm layer height setting with 0.4mm nozzle. Arachne generator, and 2 walls, 4 top layers, 3 bottom layers, and 10% gyroid infill.

Use more colors for even more fun if you have a second AMS.

Hole for earring ring is approximately 1.75 mm in diameter.

Add your favorite hook or hoop to create a set of earrings people will really taco bout!

Fun Taco Earrings

TacoEarrings_V2_BambuStudioProject.3mf

TacoEarrings_V2.3mf

Fun pickle shaped earrings 

Printed with standard 0.2mm layer height setting with 0.4mm nozzle. Arachne generator, and 2 walls, 4 top layers, 3 bottom layers, and 10% gyroid infill.  

Add a brim if you have any layer adhesion issues.

Hole for earring ring is approximately 2 mm in diameter. 

Add your favorite hook or hoop to create a set of earrings people will make a big dill about.

Pickle Earrings

Pickle_earrings_BambuStudio_Project_01.3mf

PickleEarrings_V1.stl

The zany holiday meal themed starship is based on the original Star Trek series Enterprise.

The perfect Thanksgiving/Holiday centerpiece for the hard core Star Trek fan. 

Parts fit together and should stay without glue. If you plan on handling the model and not just using it as a display piece, some glue is recommended. Especially in the neck to turkey leg connection.

A Bambu Studio Project file is included featuring all the print settings I used to print the version shown. It has some time saving tweaks, such as printing .24mm layers and lightening infill on the pie filling until the top and then using 0.08mm layers to get that bumpy pumpkin pie details.
 

Filaments used:
Pie Crust: Aceaddity Wood PLA
Pie Filling: Printed Solid Brad's Orange Glitter
Whipped Cream: PolyMaker Polylite White PLA
Turkey Leg: Unknown Brown PLA & Aceddity Wood PLA
Base: Unknown Silk Gold PLA
Corn Cobs: Voxel Yellow PLA
Forks: PolyMaker Silk Silver PLA
Neck: Unknown Brown PLA 

Starship EnterPies

Starship_EnterPies_Neck_V1.stl

Starship_EnterPies_PieCrust_V1.stl

Starship_EnterPies_PieFilling_V1.stl

Starship_EnterPies_Stand_V1.stl

Starship_EnterPies_TurkeyLeg_V1.stl

Starship_EnterPies_V1_BambuStudioProject.3mf

Starship_EnterPies_WhippedCream_V1.stl

Starship_EnterPies_CornCob_Left_V1.stl

Starship_EnterPies_CornCob_Right_V1.stl

Starship_EnterPies_Fork_Left_V1.stl

Starship_EnterPies_Fork_Right_V1.stl

Snowflake napkin holder makes any table look a little cooler. Prints flat and snaps together. Looks good in a single color, or make it pop with some color swaps.

Tight and loose versions included depending on your printer tolerances. Print the provided test piece to see which version is right for you before printing the entire thing.

If final printed parts are tight, it can help to protect the outer face and use pliers to snap the pieces together as shown in the photos.

Bambu Studio project is included with both versions sliced for printing as shown in the example.

Example printed in PolyMaker Panchroma Translucent Cyan PLA and PolyMaker White PLA at 0.2 layer height, 3 walls, and 15% gyroid infill.

Snap Together Snowflake Napkin Holder

SnowflakeNapkinHolder-Base_1X.stl

SnowflakeNapkinHolder_Loose.stl

SnowflakeNapkinHolder_Tight.stl

SnowflakeNapkinHolder-Tester.stl

SnowflakeNapkinHolder_BambuStudioProject_V1.3mf

Graphic Designer/Creative director for a small company in Texas since 1992.

Built our first 3D printer in 2017 and have been hooked ever since. Started off designing in TinkerCad, then moved up to Fusion360 and Blender.

Love designing things that are creative and/or fun for kids of all ages.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

fixumdude

Achievements

Fan Favorite

Voyager

Sequoia

Amateur Maker

Rising Star

Pinned models