Feel Free Though Hull Cap

ff thruhull cap.stl

Feel Free Kayak tie down

Feel Free tie down .25in. locknut.stl

feelfree kayak cleat track adapter .stl

This adapter is used to attach a Shoreline Marine zig zag cleat to the goofy FeelFree unitrack.  I will now be able to use the anchor trolley more efficiently. 

I designed the adapter to slide in from the end of the track.  Make sure that the longer side of the adapter is facing outward. The adapter uses the included lock nuts but I bought some stainless 10-24 oval head machine screws 1/2" long.

Printed in PETG 100% infill.  

Feel Free 8 ball knob

ff 8 ball knob .stl

Feel Free console spacer.stl

Feel Free Lure 11.5 Kayak center console pod spacer.  This spacer will allow the console pod to be used if the Overdrive peddle unit is not needed for the trip.  I had intended to bolt it to the pod but found that a good marine silicone was suffice to hold it in place.  Now the pod will rest against the brace used by the peddle drive unit and allow the pod to be secured in place with the strap.  A variable that must be take into account is that your drive unit plate might be slightly higher or lower than mine so adjustments to the STL may be required.  I left a notch cut out incase there is a need to reinstall the original hardware.  

ff console spacer.stl

FeelFree drain plug v1.stl

One way scupper plug for Feel Free Lure 11.5 kayak.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

fishermanbt

Achievements