For Ariens 921051 PLATINUM SHO.  
Oil level must be 6.1 – 6.7 cm 
(2.4 – 2.6") from the flat surface of the 
gearcase cover. 

This may work for other Ariens Snowblowers that have the same specs for this gear case--likely most Ariens.

Ariens Snowblower Gear Oil Level Dipstick

Thicker walled than what came with the original file and a bit deeper towards back of printer.  I included the brush file (from github--link is down).  https://www.printables.com/model/222331-modified-voron-decontaminator-brush-holder
Has similar file, but uses m3 as the sheet stops.  I don't use the sheet stop function.  I needed a purge bucket that would work with my kicky probe setup.
Compatible with a klicky probe that is mounted at the edge of the gantry of a Voron 2.4

Purge Bucket (thicker walls)

new custom purge jpn.stl

2 color model of the Voron Stealthburner.  I call it "hey tiger" edition.  Works best with contrasting colors.
There are quite a few tutorials out there to print this and you can do this type of print with manual color swaps.  I made it so you only need to do color swaps for 2 layers. 

Steathburner body 2 color

main body_primary color.stl

For Voron 2.4.  Sealed exhaust port cover with threaded boden port.   Add M3 heat set threaded inserts to part A.  Creates a decent seal to keep the heat in your chamber.

Voron 2.4 bowden inlet - sealed

EXHAUST COVER A.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

fedgeztan

Achievements

Novice Maker

Seedling

Voyager

Debutant

Ariens Snowblower Gear Oil Level Dipstick

Purge Bucket (thicker walls)

Steathburner body 2 color

Voron 2.4 bowden inlet - sealed