tracking pixel
F

Ubiquiti ceiling grid mount

by
fatmann66
Follow
Follow
Remix Model
F
fatmann66
|
Image 1 of 9
Ubiquiti ceiling grid mount 3d model
F
fatmann66
|
Image 1 of 9
Ubiquiti ceiling grid mount 3d model
2D
3D
Makes
Ubiquiti ceiling grid mount 3d model
Ubiquiti ceiling grid mount 3d model
Ubiquiti ceiling grid mount 3d model
Ubiquiti ceiling grid mount 3d model
Ubiquiti ceiling grid mount 3d model
Ubiquiti ceiling grid mount 3d model
Ubiquiti ceiling grid mount 3d model
Ubiquiti ceiling grid mount 3d model
Ubiquiti ceiling grid mount 3d model
This model is restricted by licensing terms. 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2877851.

Designed for a #6 Hillman nut (Lowes) and 1/2 screw. Mount both the plastic and metal disks provided with the AP ( plastic disk is flimsy on the AC pros and the metal disk helps). This should give just enough clearance so the 1/2 screw will be flush with the top of the bracket.


0 Likes2 DownloadsJune 15, 2022


0 Likes2 DownloadsJune 15, 2022
This model is restricted by licensing terms.