Designed by us, 3D printed by you.
This is OSLO, an incense holder.
Recommended settings:
Layer Height: 0.2/0.28 Loop Walls: 2/3 Top Shell: 3 Bottom Shell: 3 Infill: 10% Gyroid
Categories:
48 Likes88 DownloadsFebruary 29, 2024
Designed by us, 3D printed by you.
This is OSLO, an incense holder.
Recommended settings:
Layer Height: 0.2/0.28 Loop Walls: 2/3 Top Shell: 3 Bottom Shell: 3 Infill: 10% Gyroid