Bloom, cotton pads/tips dispenser.

Designed by us, 3D printed by you.

This is Bloom, a cotton pads/tips dispenser.

Measures: Vase: (L)10 cm x (W)10 cm x (H)10 cm Branch: (L)8,8 cm x (W)8,8 cm x (H)19,4 cm

Recommended settings: Size of magnets used for this project is 10mm x 3mm.

Layer Height: 0.2 Loop Walls: 3 Top Shell: 4 Bottom Shell: 3 Infill: 10% Gyroid