tracking pixel
eg_design

BATTERY TRAY UPPER BASE (EXTENDED), AR320351

by
eg_design
Follow
Follow
Remix Model
eg_design
eg_design
|
Image 6 of 11
BATTERY TRAY UPPER BASE (EXTENDED), AR320351 3d model
eg_design
eg_design
|
Image 6 of 11
BATTERY TRAY UPPER BASE (EXTENDED), AR320351 3d model
2D
3D
Makes
BATTERY TRAY UPPER BASE (EXTENDED), AR320351 3d model
BATTERY TRAY UPPER BASE (EXTENDED), AR320351 3d model
BATTERY TRAY UPPER BASE (EXTENDED), AR320351 3d model
BATTERY TRAY UPPER BASE (EXTENDED), AR320351 3d model
BATTERY TRAY UPPER BASE (EXTENDED), AR320351 3d model
BATTERY TRAY UPPER BASE (EXTENDED), AR320351 3d model
BATTERY TRAY UPPER BASE (EXTENDED), AR320351 3d model
BATTERY TRAY UPPER BASE (EXTENDED), AR320351 3d model
BATTERY TRAY UPPER BASE (EXTENDED), AR320351 3d model
BATTERY TRAY UPPER BASE (EXTENDED), AR320351 3d model
BATTERY TRAY UPPER BASE (EXTENDED), AR320351 3d model
This model is restricted by licensing terms. 

Increase cell count and or capacity! For the ARRMA 6s lineup add an extended upper base to accommodate larger battery capacities or higher cell count.

NOTE This will affect body mounting as the overall height of the battery tray increases (TALION/KRATON)

Optional: ARRMA Body Post Set, ARAC3476

Cut and prepare steel rods to fit into the part for an OEM look. HSS or A2/M2 steel preferred over stainless steel

Material: 3mm x 200mm High Speed Steel (HSS) Blank Rod

Print in TPU @ 70-100% 4 top/bottom, 4 walls

View drawings attached for further instructions, feel free to ask questions or post suggestions.


0 Likes4 DownloadsMarch 25, 2024



0 Likes4 DownloadsMarch 25, 2024
This model is restricted by licensing terms.