This enclosure is for a Raspberry Pi 3 or any Model B.

The enclosure is well-crafted with a tight fit, such that the Raspberry Pi fits snugly inside it. Although it can be fastened with four self-tapping screws, this may not be necessary as the tight fit alone is sufficient to keep everything in place.

I used the following printer settings are:

Material: PLA
Layer Height: 0.28
Infill Density: 25%
Support: None

The enclosure has been designed to require no support material during the 3D printing process, making it an easy and straightforward project to print.

Raspberry Pi 3 Sting Enclosure

RPi3_Top_V3.stl

RPi3_Bot_V3.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4749870.

I recently bought an Ender 3 v2 printer as a second printer and did not plan to do any medications.  Unfortunately, the cooling performance when printing PLA was less than optimal. This might be something specific to my printer.  I decided to design a mount with two 5015 blower fans.

The focus of the design was to ensure as much cooling as possible while keeping the weight down (considering 2 x 5015 fans were used).

Parts
4 x M3x15 Self tap 
4 x M3x20 Self tap
2 x M4x20 Bolts and Nuts (Optional)
1 x Small Cable Tie

To use a 40x40x10 fan print the Cone_40x10.stl file.  To use a 40x40x20 fan print the Prod_Cone_40x20.stl file.  The Cone_40x40x20.stl design has not been tested, bit should work.

Due to the size used by the dual fans the probe of the BLTouch is located  at X:-47, Y:-11 from the nozzle.

Thanks to @Gil80 for the assistance with testing the design!


Zee Fan Duct for Ender 3 v2

Zee_Wings_1mm_v2.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4906026.

To enable easy assembly of electronic projects I created this rotating component holder for SMD assembly.  The PC board can be placed on the component holder for easy rotation to easily place the components.

Zee SMD Component Holder

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

eduplooy

Achievements

Seedling

Explorer

Raspberry Pi 3 Sting Enclosure

Zee Fan Duct for Ender 3 v2

Zee SMD Component Holder