Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5379621.

This is a great design, I've just removed the make and model from the designs by filling them in Tinkercad, as I only have the one disc sander and don't need to add confusion around the branding.

This mount fits well my 5 inch random orbit disc sander made by Bauer, although I suspect the mount can accommodate quite a number of other makes and models. Don't forget to use supports on the disc paper holder; I forgot to do so but was able to trim the underside and make it work.

If you're looking to further remix the files, you can find them on Tinkercad here:
- disc sander holder: https://www.tinkercad.com/things/0eyAzyjcN6h?sharecode=sHL2Ltlby9r87oKOjP_ZcYsbSiLzsVw4crglBd4AHbk
- disc paper holder: https://www.tinkercad.com/things/f1tuMyZ2GmW?sharecode=qlbEFZpw8pMEUKobzpIvReCFjI4KGJDXo2yGklMfG04

5 inch Disc Sander Wall Mount Plus Disc Paper Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4031739.

This purely the "X Wing - Star Wars Christmas Ornament - Simple Print" by v2oracle_9297 with the only change being that I have split the objects into separate files.

To have the same as the original, you will need:

- 2x wing.stl
- 2x fuselage.stl
- 1x nose.stl
- 1x connectorA
- 1x connectorB

Why did I do this? Because to fit all the parts on my tiny 3D printer, it required rearranging them from the original configuration (which is perfect for slightly larger print beds).

X Wing - Star Wars Christmas Ornament - Split Files

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4048355.

Having already purchased a "moon lamp circuit", I remixed the screw cap from the original "Progressive Detail Moon Lamp with Rechargeable Moon station by moononournation to accommodate its 10mm diameter barrel around the power input. I also cleared out the majority of the cap details to allow for customization, such as adding my kid's name to it. Without the texture on the bottom, it still came out great due to my textured PEI build surface.

The STL here is without any particular name, feel free to customize it to your needs, or use it as-is.

# Mounting The Board

To mount the electrical barrel, I covered the end of the power port with blue painters tape, trimming it to size, and used a considerable amount of super glue and then used a little instant set to hold it while fully drying. It hasn't failed yet and, should it, I might consider some 5 minute 2-part epoxy or maybe just some hot glue from a hot glue gun.

Customizable "Moon Lamp Circuit" Screw Cap for Progressive Detail Moon Lamp with Rechargeable Moon Station

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3557919.

This should allow my Logitech C510 (a close model to the C525) to mount on top of the GoPro compatible bed mount for my CR-10.

I was not entirely happy with the fit provided by the narrow gap from the [FFCP GoPro compatible mount](https://www.thingiverse.com/thing:2445209) by kashhatton, as it was generally unable to hold my Logitech C510. The C510 should have a near identical mount spacing to the C525, which that design was for. So, with it being appropriately licensed, I [threw it in Tinkercad](https://www.tinkercad.com/things/5vPbeeRadqI-c510-gopro-mount) and hacked the GoPro mount portion together with part of another mount to do the job; the [Creality CR10 Logitech C525 mount](https://www.thingiverse.com/thing:2560615) by Refugeek.

I printed this in PETG to accommodate my needs and to match up with the mount I printed similarly for my CR-10's bed, the [CR-10 Center GoPro Mount](https://www.thingiverse.com/thing:2585996).

C510/C525 Mount for GoPro Connector

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3082483.

I really liked the [Needle File Pegboard Holder](https://www.thingiverse.com/thing:1353311) by [andrewsworkshop](https://www.thingiverse.com/andrewsworkshop) but there was one tiny problem with it; the description lists it as accommodating a set of six(6) needle files and the design has five(5) holes. So I remixed it to have six.

I used [tinkercad](https://www.tinkercad.com) and "eyeballed" the spacing, for the most part. It seems relatively even but may not be exact, as I'm a bit of a 3d modeling n00b, ¯\\_(ツ)_/¯.

If you're looking to remix my remix, have at it:
https://www.tinkercad.com/things/fMsEhpofrm2-needle-file-pegboard-holder-x6

x6 Needle File Pegboard Holder

Señor Software Developer, lover of coffee, 3D printing, and hand tool woodworking.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

edm00se

Achievements

Seedling

Voyager

5 inch Disc Sander Wall Mount Plus Disc Paper Holder

X Wing - Star Wars Christmas Ornament - Split Files

Customizable "Moon Lamp Circuit" Screw Cap for Progressive Detail Moon Lamp with Rechargeable Moon Station

C510/C525 Mount for GoPro Connector

x6 Needle File Pegboard Holder