A holder stand for small screwdrivers, hex keys, tweezers, etc. (max diameter ~12mm) with rotating top to allow users to switch between tools more conveniently. The stand also have a small container that can be used to store spare screwdriver bits, screws & nuts, and other misc. small items.

This example project was printed using eSUN ABS+ Black & Peak Green , our favorite matte-colored ABS filament that resist many chemicals (yes, including acetone) and higher heat resistance, but need to be printed at higher temperature for good layer adhesion.

Parts:
- FDM print all models once using hard plastic like PLA, PETG, ABS without support. Since the part Container Top & Container Bottom have threaded surface, it is recommended to print with 0.2mm layer height or lower.
- 1 x 608ZZ bearing, we recommend to avoid the rubber/plastic seal version to avoid unnecessary friction that may dampen the bearing movement
- 1 x M8x20mm screw
- 1 x M8 nut
- (Optional) 1 x Anti slip sticker like 3M EVA/PE foam or 3M 9080. We use 3M EVA foam that was cut in circle shape with 70mm diameter.

Assembly:
- Insert M8 nut to underneath Main Bottom's
- Insert 608ZZ bearing from the Main Top's bottom
- Attach Main Bottom to Main Top and use the M8 screw
- Screw down the Container Top to Container Bottom
- If you have an anti slip sticker/foam, stick it underneath the Main's Bottom so that the holder stand won't be easily pushed around

Designed by Diystrument 🇮🇩
Follow my socials IG, FB, Youtube, etc.. @Diystrument for more of our projects! https://www.instagram.com/diystrument/
Please carefully read the licensing section to see the appropriate usage of this design, thank you.

Rotating Screwdriver Stand

Rotating Screwdriver Stand - Top - Diystrument.STL

A resting stand used to hold the neck of a guitar (electric, acoustic, bass, etc.) so you can perform maintenance like replacing string, removing pickups, etc. without making the guitar wobbles around and bumps its headstock due to uneven weight distribution or its overall shape.

Can be used for ukulele, violin, and other string instruments as well, though it was designed for standard 6-string guitar neck in mind. 

See the image for recommended printing orientation.

Parts:

- FDM prints the Body with hard plastics like PLA, ABS, PETG, etc.
- FDM prints the Pad with flexible material like TPU, TPE, etc. You could print this with hard plastics but you might risk scratching the guitar neck.

Assembly:

- Just put an adhesive in between the parts. I would recommend using a flexible/rubber adhesive like the all purpose (often yellowish) glue from Aibon, UHU, FOX, etc. that used for leather, wood, plastic, etc. Press firmly and let dry according to the adhesive usage instructions.

Designed by Diystrument 🇮🇩

Follow my socials IG, FB, Youtube, etc.. @Diystrument for more of my projects! 

https://www.instagram.com/diystrument/

Please carefully read the licensing section to see the appropriate usage of this design, thank you.

Guitar Neck Rest

Guitar Neck Rest - Diystrument - Body.STL

A fan for cooling your batteries to prevent overheat which results in fast cell degradation (shorter battery life) especially during fast charging (>1A). Can be used on various charger style, from standard chargers for AA/AAA, 18560, to various battery pack sizes, as long as the wind blows directly to the batteries. 

Example use 5V 0.2A fan which blows more than enough air to help dissipate heat from fast charging 18560 & AA on LiitoKala charger, printed using Polymaker PolyTerra PLA Sunrise Orange & Sunlu PLA+ Black.

Parts:
- FDM print all models once using hard plastic like PLA, PETG, ABS without support; highly recommended to print using flame retardant plastics for additional safety measures
- 1 x 60x60x15mm / 6015 DC Fan; can use a thicker fan if you'd like
- 6 x M3 x 15mm Screws
- 6 x M3 Nuts
- 1 x SPST 2 Pin Switch 15x10mm; optional but recommended for easy switch on/off, you will need a solder to do this

Assembly:
- Insert the nuts into the printed models
- Plug the switch into the hole on Stand, then solder the switch in between the fan cable
- Knot the cable before installing the fan on the Main Body so it can act as cable stopper/retainer
- Screw down the Main Body to the Stand and done!

Designed by Diystrument 🇮🇩

Follow my socials IG, FB, Youtube, etc.. @Diystrument for more of my projects! 

https://www.instagram.com/diystrument/

Battery Charger Cooling Fan - Main Body-1.STL

Battery Charger Cooling Fan - Stand-1.STL

A bracket for Creality Ender 3 S1 which can hold a mini PC used to run Klipper. Install it on the side of the printer using the original screws from the frame.

Print using hard plastics like PLA, PETG, ABS without support.

Designed by Diystrumment 🇮🇩

Follow my socials IG, FB, Youtube, etc.. @Diystrument for more of my projects! 

Creality Ender 3 S1 Mini PC Bracket

Ender 3 S1 Mini PC Bracket - Diystrument.STL

A cover-less humbucker pickup frame for electric guitar. This v1 version is available in multiple height and is angled a bit so the humbucker can be more parallel to the string position. Does not fit humbucker with cover plate! V1 is designed to have a nice fit with the coverless one.

Also not compatible with guitar that have curved top (like some of Les Paul build) since it have flat bottom, unless you sand it according to your guitar curvature.

Designed by Diystrumment 🇮🇩

Follow my socials IG, FB, Youtube, etc.. @Diystrument for more of my projects! 

Diystrument.com

Humbucker Pickup Frame v1

Humbucker Pickup Frame - Angled 9-7mm - Diystrument.STL

A bracket for inline fan for 4" exhaust that usually is around 98mm in diameter (see pic).

Need two 3mm screw with at least 5mm long to mount.

4" / 4 INCH INLINE FAN BRACKET

4 inch Inline Fan Bracket - Diystrument.STL

A bracket to hold 4" exhaust pipe on vertical surface. To attach the pipe, simply slide it to the bracket. No need to screw & unscrew for every adjustment.

Need two 3mm screw with at least 5mm long to mount.

4" / 4 INCH EXHAUST PIPE BRACKET

4 inch Exhaust Pipe Bracket - Diystrument.STL

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

diystrument

Achievements

Seedling

Debutant