Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4978332.

Here is a remix of the Jack'O lantern to fit a light bulb.

I modified the centre of the pumpkin to fit the IKEA HEMMA electric mount.

In order to install the mount, you have to enlarge it to 200%.



Jack O'Lantern for light

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5426708.

This is a cooling that I have adapted for my printers. I installed it on my CR-10 V3 with an E3D V6 hotend and for my Ender 3 V2 with an E3D V6 hotend too.

The fans used are 4010 for the hotend and 5015 for the nozzle.

To hold the 5015 fan, on an Ender 3 V2 you can reuse the existing screws for the nozzle fan, otherwise provide small screws

E3D v6 hotend cooling

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4981103.

I used this filament guide for the ender 3 to make a guide without taking anything apart on the printer to install it : https://www.thingiverse.com/thing:3052488

You will need to print:
1 - bracket
1 - ring
2 - spacers

Plus you will need:
1 - 608 bearing (probably the most commonly available bearing, used for skateboard wheels and other things).
1 - M4 x 18mm or 6-32 x 3/4 bolt

CR-10 V3 filament roller guide

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5123870.

It's an infinite tree, you can make it any size you want.

The top and the first slice must be at the same scale

Each slice must be 20% larger than the previous one.
Ex : slice 1 : 100%, slice 2 : 120%, slice 3 : 144% (+20% of 120), etc

For the trunk, it must be enlarged to the same scale as the last slice

Infinite Christmas tree

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5427226.

Juste a scan of the fusilli

Pasta fusilli

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5404497.

The support of the beagle camera allows to put it in the 2 directions, what allows to make timelapse format 16:9 or 9:16

You will need screws, in my case, I used wood screws #6 3/4" (metric 4x20mm) to hold the camera and a longer one to assemble the two parts

Beagle camera holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5078649.

I modeled these stand legs to be able to reuse a floor board and make a monitor stand for my office

Monitor stand legs

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4986039.

spatula through hand

the space for the hand makes 23mm of base
Enlarge it so that your hand can fit through

You need :
- 1 blade
- 2 handles
- glue

Halloween spatula

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5388263.

it's a remix of the Beagle Camera support but to be able to position it to make time-lapse in Tiktok format.

You will need screws, in my case, I used two wood screws #6 3/4" (metric 4x20mm)

Beagle Camera bracket

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

dfactory

Achievements

Seedling

Trailblazer

Debutant