This model is restricted by licensing terms.
View license.
Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5172583.
Инструкция на русском языке Why this print head?- Fits any 3D printer, that uses ender-3 ot similar X carriage
- Printhead can be removed for service by unscrewing only 4 screws
- No print volume losses on most printers
- Easy to print - no supports needed
- Improved air flow for both hotend and model cooling
- BMG or clone (right)
- E3D V6/Volcano/Dragon/Dragonfly/NF-Zone hotend
- 40x40x10 axis fan for hotend
- 1x or 2x 5015 turbo fans for model cooling
- 3x M3x6 round head screw
- 2x M3x8 round head screw
- 2x M3x10 round head screw
- 4x M3x12 round head screw
- 2x M3x16 round head screw
- 4x M3x20 any head screw
- 10x M3 nut or M3x4 heat-set insert
- Models are made for right BMG
- For base and mount use any filament with ~80°C heat resistance (PETG, ABS, ASA, HIPS, PA, PP, PC, etc.)
- For fan ducts use any filament with ~100°C heat resistance (ABS, ASA, PA, PP, PC, etc.)
- Models are already placed in correct printing orientation
- Models are created for 0.4mm line width and any layer height. If you plan to use other values, check layer preview to find wrong pathes.
- Use 3+ perimeters and 100% infill for max rigidity of mount
28.12.21 - Increased strength and rigidity of parts 12.01.22 - Increased strength and rigidity of base part 13.06.22 - Increased strength and rigidity of all parts 17.10.22 - Icreased efficiency of fan duct + added BLTouch mounts 25.10.22 - Added mounts for Voxelab Aquila
3 Likes12 DownloadsJune 21, 2023
3 Likes12 DownloadsJune 21, 2023
This model is restricted by licensing terms.
View license.