Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3407093.

This is a set of accessories to mount the [7 inch LCD screen](https://www.thingiverse.com/thing:3347315) to a table or desk, such as an Ikea LACK. 

The mount is attached to the screen case with 4 off M3x16 bolts and nuts. The arm is mounted using 4 off M3x8 bolts and nuts. The arm can be mounted to a table using No. 12 screws. I have used captive nuts on all the components to make assembly easy.

There are a pair of arms available, the one called mountarmlowz I designed to work with the Prusa i3 MK3 LACK enclosure, and offers sufficient space between the case and the doors of the enclosure. The other arm is for more generic mountings. 

The mountarmlowz now has a version 2!, this version has some extra stiffening to make it more rigid when attached!

If you want to see how I used octoprint to automatically turn the screen on and off go and have a look at my github repo [here!](https://github.com/darraghbr/octoprint-uhubctl-setup)

# Update 26/09/2019

Removed mirroring and combining artifacts from the casemount file, republished as V2. 

Issue with V1 did not occur on PrusaSlicer and therefore I did not notice it. Thank you to RyanParle for raising the issue.

Elecrow screen mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3347315.

I was looking for a case for my Elecrow 7 inch LCD screen to be used as a touch interface for my Octoprint server, I came across the original by arrowmeiwaracing but noticed it was in multiple parts, my printer is big enough to do the parts in a single piece so I used Fusion 360 to modify the relevant parts.

I might be designing further mounts to use this screen.

**After printing version 1 myself, I have noticed that the clips are pretty much useless**

The case I have printed is held together with:

4 off M3*12 hex socket cap head bolts
4 off M3 nuts

Version Details:
======

Version 1 
------

Version 1 is the same as the original by arrowmeiwaracing, but is in a single piece so no glueing is required

Version 2
------

Version 2 has places for captive M3 nuts in the case body, this makes the case much easier to assemble


Version 3
------

Version 3 retains the captive M3 nuts, and the details for the case clips have been removed to make a sleeker looking case.


If you want to see how I used octoprint to automatically turn the screen on and off go and have a look at my github repo [here!](https://github.com/darraghbr/octoprint-uhubctl-setup)

Elecrow 7 inch LCD screen case (no gluing required)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3210172.

I wanted something to hold my Wera bottle opener to the side of my computer case, so I scaled the original down by 19% to better fit the bottle opener, removed the peg board fittings and added a pair of rebated rectangles to fit 20mm wide, 6mm tall and 1.5mm deep magnets.

The Fusion 360 file is attached, feel free to use it, as long as you credit Peaches491 and preferably myself.

Wera bottle opener magnet mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3970106.

You can use this file, in combination with raft layers and a mid-print pause to make a Star Trek Communicator badge with a pin back encased in the print. Just be careful that the pin backs you have are the correct size (you can of course alter the dimensions of the pocket on the back of the badge.)

For more information and detailed instructions, please visit my [blogpost.](https://darraghbr.blogspot.com/2019/11/printing-pin-badges-on-prusa-i3-mk3s.html)

Star Trek Voyager Communicator with pin back

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4051632.

This is a replacement ornament top you can use to repair damaged or broken ornaments, this is currently suitable for ornaments with a neck of around 20mm in diameter, but of course you can scale it to suit your requirements.

Christmas ornament top

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3976164.

This is a replacement watch strap keeper, this one is a rough replica of the watch strap keepers that came with my Traser H3 P96 Outdoor Pioneer, please see the attached drawing to determine whether this component is suitable for your needs. I printed this part in TPU for flexibility.

I used a mid print pause to print the strap keepers around the watch strap. If you do this please carefully look at the planned travel moves and the g-code used for the pause. 

On my Prusa i3 MK3s I used this code in the 'After layer change G-code' box in PrusaSlicer.

'''{if layer_num == 88}
M300 ;ACTIVATE BEEPER
G1 X10.000 Y200.000 E0; parking position
M1; user stop
G28 Y; Home Y axis
M105; return to current temp
{endif}
'''

Watch strap keeper (Traser P96)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4586165.

This is a remixed version of the fully printed resin vat drainer by MakerMatrix that has been modified to work with a frame constructed of 2020 aluminium extrusion. You can construct the entire frame with a single meter of 2020 extrusion. 

Please review the .pdf drawing attached for layout and cutting dimensions for 2020 aluminium extrusion.

There are two .stl files included, a regular version and a lightweight version that uses a bit less plastic. 

Resin Vat drainer 2020 extrusion

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3464017.

These are a set of printable jaws for the Stanley Multi Angle Vice, they replace the soft jaws that came with the vice, I have designed a few sets to accomodate different types of work holding, with vertical and horizontal prismatic features, as well as different sizes to accomodate smaller and larger stock. 

I printed a set in PLA and then a set in TPU. I have uploaded the Fusion 360 files to allow people to modify them however they like.

The version in the image is the large prismatic ones and the regular vise jaws.

Printable vice jaws for Stanley multi angle vice

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4559769.

This is a photography fixture for the Smartphone Photo Studio by CreativeTools. It allows you to take repeatable photographs of the AmeraLabs Town calibration part.

Fixture for AmeraLabs Town calibration part 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3171254.

This is a vacuum adapter for a Black and Decker Dustbuster, model number NV7210N, I designed this to assist with removing the air from zip lock style bags. 

My usage case is currently for longer term storage of filament in the rigid.ink zip lock bags, I wanted to remove as much as I could to help the dehumidifier packets keep the moisture content low.

This is just the first pass, and it works ok, at some point I will come out with a v2 with a longer tube perhaps with some taper to it. I will probably elongate the boss to further improve the usability.

This object is pretty flimsy in it's current state, I will try to improve the usability in the future.

[![Youtube Video](http://img.youtube.com/vi/e5KmEtB7qxk/0.jpg)](http://www.youtube.com/watch?v=e5KmEtB7qxk "Youtube Video")

# Version 2 update

I have created a version 2 that is significantly stronger and more usable. The version 1 files will be kept for reference. I have included some draft angles on the internals of the boss to improve rigidity and a draft angle on the spigot to improve its rigidity and usability. The spigot and boss are both longer to make it easier to use. I find it easiest to insert the spigot into the corner of the zip lock bag, rather than in the centre of the seam. 

[![Youtube Video](http://img.youtube.com/vi/53n0HizPsj8/0.jpg)](https://youtu.be/53n0HizPsj8 "Youtube Video")

Dustbuster vacuum adapter

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3689869.

These are a set of protective soft jaws for the smallest Knipex Pliers Wrench (model number 86 03 125). 

If you work on delicate items such as electronics you can use these jaw covers to protect whatever you are working on.

These jaw covers are only compatible with the smallest Pliers Wrench that Knipex currently make, the 125mm overall length version. 

You should print these from flexible material because the top jaw has a small lip that helps to retain the jaws on the tool and they work best in flexible material. 

Knipex Pliers Wrench jaw covers

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3518289.

NB: You might want to print this with something like PETG or a higher temperature capable material. This will help to prevent warping from the heat of the LED ring.

I use an enclosure for printing, so the light levels aren't great, I have a strip of LEDs mounted to the top of the enclosure, but whatever is being printed is pretty much in shadow because of the extruder. Now with this part, I can finally see what is being printed!

This is a modified face plate for the Articulated Raspberry Pi Camera Mount that houses a ring of LEDs, I have tested it with a ring of 16 Neopixels, available from [Adafruit](https://www.adafruit.com/product/1463), and a 12 LED ZIP Circle, available from [Pimoroni](https://shop.pimoroni.com/products/zip-circle-12-zip-leds). 

I would personally recommend getting one of the RGBW Neopixel rings, as it means you can get a nice natural white light instead of the slightly more blue light that you get when you run the RGB LEDs at full tilt to get a white colour.

You will also need a microcontroller to control the LEDs, in my case I used an ATtiny85 MCU. Depending on the power supply to your printer you may need a step down voltage regulator, pre built versions of which can be found on eBay or Amazon, or you can have a go at deriving a 5V supply yourself with a linear voltage regulator or go all fancy and build a proper switching voltage regulator like I did, details of which can be found in the 'Installation' section. 

Articulating Raspberry Pi Camera Mount cover with ring light

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3607109.

NB: You might want to print this with something like PETG or a higher temperature capable material. This will help to prevent warping from the heat of the LED strip.

Perhaps the pinnacle of "If it's stupid, but it works, it's not stupid" This lets you mount two strips of 24V LEDs to the camera face plate to illuminate the print area. 

I use an enclosure for printing, so the light levels aren't great, I have a strip of LEDs mounted to the top of the enclosure, but whatever is being printed is pretty much in shadow because of the extruder. Now with this part, I can finally see what is being printed!


Articulating Raspberry Pi Camera Mount cover with LED strip

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3451921.

This is a magnetic holder for a TS80 soldering iron.

<h2>Version History</h2>

<h3>Version 1 - Soldering Iron Holder.stl</h3>

This version uses a pair of 10 x 3.5 x 2.25 mm N45 Neodymium magnets in the base of the print to attach it to a suitable surface. I used a tiny bit of superglue to keep the magnets in.

<h3>Version 2 - Soldering Iron Holder captive magnets.stl</h3>

This version also uses a pair of the same 10 x 3.5 x 2.25 mm N45 Neodymium magnets in the base of the print, this time however they are completely encapsulated by the print, so you will have to pause the print at a layer height of 3.5 mm and install the magnets, then resume the print. The result is that the holder still works well, but it is not held to the surface quite as strongly as the version where the magnets protrude from the back of the print.

TS80 magnetic soldering iron holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4054376.

This is a windscreen component for the Stargate Atlantis Puddle Jumper by Psyqjo. It should be installed from the back side of the opening in the front section of the model.

Puddle Jumper Windscreen

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4607262.

This is a remix of the Magigoo mount by Jubelsalami, it extends the capacity to 6 bottles instead of 4. 

There are two versions supplied, one with the same mounting method as the original, which is a small step with a retaining screw. The other version uses a pair of countersunk No. 7 or smaller wood screws to attach it flush to a surface, the side of a LACK rack for instance. 

6x Magigoo mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3201030.

I wanted something to reduce the footprint of the 'Screwable Benchy Stand' by gomadin, so I put this together in Fusion 360, the thread is compatible with the Benchy stand.

Benchy Stand Base

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4745913.

This is a customisable foot, the default settings are for a 2020 extrusion with an M4 socket head bolt. 


Customisable circular foot

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4745925.

This is an OpenSCAD version of the original WB Spacer by psdesign. It allows you to vary the thickness of the shim.


Customisable Elegoo Mars shim

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4070321.

This is a replacement foot for the Ikea LÄMPLIG trivet. Print in flexible material for best results.

Ikea LÄMPLIG trivet foot

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4642176.

This is a thumb ramp for a Warwick Corvette $$, but it should also work for instruments that have a pair of MusicMan humbuckers with around a 12mm gap between them.

You can attach the thumb ramp to the pickups with a bit of double sided tape, I would not recommend sticking it to the body of the instrument. 

Warwick Corvette $$ thumb ramp

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4974330.

This is an OpenSCAD version of the original Anycubic Mono X Wham Bam Z axis spacer by Elantris. It allows you to vary the thickness of the shim.

Customisable Anycubic Mono X spacer

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3413989.

This is a clip over webcam cover for the [Dericam web cam.](https://www.amazon.co.uk/gp/product/B07FNB2KDQ/ref=ppx_yo_dt_b_asin_title_o00__o00_s00?ie=UTF8&th=1) I built it for the model W2, but it looks like it should fit W1 as well (not W1C or W2P.) 

The tolerances on the print are a little tight, but with a small amount of force I was able to free the hinged section of the cover.

I am sure this camera is rebranded and sold under another name, if you find one, let me know so I can add it to the listing. 

Dericam webcam cover

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4607266.

This is a remix of the Magigoo mount by Jubelsalami, this adds a couple of holes for countersunk wood screws in order to attach it to a flat surface such as on the side of a LACK rack. You can use No. 7 countersunk wood screws or smaller. 

4x Magigoo flush mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5023944.

I often want to change soldering iron tips and never had anywhere to put the hot parts so I made this.

This will work for TS80(P) soldering iron tips and I guess anything with a 3.5mm jack on the end of it?

TS80 Tip Holder

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

darraghb

Achievements

Seedling

Debutant