Articulated dragon that does not need the use of supports. It has a rock to use as a base for the dragon.
It is not necessary to paint the different parts, the 3MF file (orcaslicer) contains the information for changing colors.


Volcanic dragon (without supports)

Volcanic dragon.3mf

The figure has different interchangeable kitchen accessories such as a rolling pin, wok, whisk or knife.

The turtle does not need supports for printing. It is recommended to use tree supports for the kitchen utensils.


Chef Turtle (Keychain)

Chef_turtle.stl

Fun keychain with Halloween pumpkins.
3MF files are ready for multi-color printing.


Halloween Pumpkin Keychain

Pumpkin_keychain_001.3mf

Simple flowerpot vase. There are two versions, one to print in “vase” mode and one solid with a thickness of 2mm.

Hand-stitched crochet flowerpot vase

Vase_02_solid.stl

Tunisian crochet flowerpot vase

Vase_01_solid.stl

Fun toy of a pumpkin with articulated branches. Inside you can place a 30mm candle to decorate the house on Halloween.
The design contains two pumpkin models and three types of branches.

The pumpkins and branches (legs) do not need supports, only the base for the hat, the buckle and the stem.
The recommended printing parameters are:
Material: PLA
Layer height: 0.20mm
Supports: only in the indicated areas


Articulated Pumpkin

pumpkin_01.3mf

Ghost for Halloween decoration. The one shown in the photos is printed in a filament that glows in the dark, but you can use any other color that allows the light to pass through.

It is only necessary to use supports on the base.
The recommended printing parameters are:
Material: PLA
Layer height: 0.20mm
Supports: only in the indicated areas


Luminous ghost

Luminous ghost.stl

Fun box to store bag clips, attached with magnet to the fridge door.
No need for a multicolor printer as the pieces can be printed individually.
For anchoring there are two designs, flat surface to stick a self-adhesive magnet or with a support to place three 8x3mm neodymium magnets.

The clips have moving parts that can stick together during printing, if you have problems and can't get them open try reducing the extrusion multiplier on your laminator. The pieces in the photos are made on an Elegoo Neptune Max 4 with the extrusion multiplier of 0.96.

French Fries (Bag Clips)

clips.3mf

clips.stl

Fun earring to go with a Halloween costume.
The earrings are printed in UV resin and hand painted.

Halloween worm earring

WORM_model_01.3mf

Funny lamp in the shape of a ghost. The fabric texture and buttons give it a casual look.
Candles with a diameter less than 32mm can be used inside.

Supports are only required at the base.
Recommended printing parameters are:
Material: PLA
Layer height: 0.20mm
Supports: only in the indicated areas


Spooky ghost lamp

Ghost.stl

Fun ritual of candles and skulls for Halloween. The designs imitate the texture of crochet and have different versions to arrange the set in the way you like.
Along with the candles and skulls, a simple support for the LEDs is added. You only need two 3V CR2032 batteries and an LED of the color you like best. You can also use candles with LEDs with a diameter less than 30mm.

Skull Lamp

Skull_02.3mf

Fun crochet bag for Halloween. The pumpkin has a hinge on the back so you can open the mouth and tabs on the sides to keep it closed.
Strings on either side allow you to insert a strap to carry it as a bag.
The pieces have been printed individually, but the whole set can be printed with a multi-color printer.
For the hinge you only have to insert a piece of 1.75mm filament

Pumpkin bag

Top pumpkin.3mf

A jar for storing Halloween candy, the design has an opening in the back to install a light fixture and turn it into a lamp.

The pumpkin only needs supports in the mouth; in the rest it is not necessary. The hat has been printed with supports on the brim, for the crown it is not necessary.

The recommended printing parameters are:
Material: PLA
Layer height: 0.20mm
Supports: only in the indicated areas



Pumpkin with a hat

HAT.3mf

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

darevix

Achievements

Seedling