tracking pixel
Daniel K

Bear 2.1 rubber - silicone mold for silicone feet

by
danielkrah
Follow
Follow
Remix Model
danielkrah
danielkrah
|
Image 1 of 6
Bear 2.1 rubber - silicone mold for silicone feet 3d model
danielkrah
danielkrah
|
Image 1 of 6
Bear 2.1 rubber - silicone mold for silicone feet 3d model
2D
3D
Makes
Bear 2.1 rubber - silicone mold for silicone feet 3d model
Bear 2.1 rubber - silicone mold for silicone feet 3d model
Bear 2.1 rubber - silicone mold for silicone feet 3d model
Bear 2.1 rubber - silicone mold for silicone feet 3d model
Bear 2.1 rubber - silicone mold for silicone feet 3d model
Bear 2.1 rubber - silicone mold for silicone feet 3d model

A mold to create some rubber feet for the bear 2.1 frame. I used the TFC silicone by TROLLFACTORY

Mixing ratio: 40g component A 40g component B 3,6G black pigments

The original screws doesn't work with the screws anymore because of the original feet are designed to use only a little material to bolt them on the frame. I use M5x16cm screws.

For screwing the mold together 6 M3x20cm screws + nuts are needed.

Links to the things i used are in cnc kitchens video: https://www.youtube.com/watch?v=O5UiXky85hA


0 Likes6 DownloadsNovember 7, 2021


0 Likes6 DownloadsNovember 7, 2021