**About**:

This is a remix of the https://www.printables.com/model/344977-bookmark bookmark.

I liked the model , but it needed supports to be printed horizontal , and had issues to print vertically.

**Design:
**
Simple arrow shaped bookmark that can clip on pages and the arrow can point to the current paragraph or line you are reading

**Printing Instructions:
**
This bookmark has to be printed vertically , and should require a brim , because the base is barely 2 mm wide.

I printed this with 0.6mm nozzle, 0.3mm layer height, but you can choose your prefered print settings.

I would also recommend to use slow print speeds to avoid warping.

 

Arrow Bookmark

bookmark arrow.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5330326.

I needed a tray to keep the 3d printed spinners falling off the table. I created the large version (diameter: 135 mm , edge 6mm) and a small version (diameter: 70mm edge 6mm ) . 
Ideally should be printed with silk PLA to keep the surface smooth.
I also increased the top layer count to 3 to keep the top sturdy with minimum infill

Spinner tray

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5440657.

The OG lame was pretty good , but because of not so good tolerances of my printer (and lack of my expertise ) the blade was pretty loose and wiggly. So I modified the clamps to have 2 holds on the blade. Its much more sturdrier now. and doesnot need any extra supports for printing.

"Butterfly" style bread lame with extra supports

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5330311.

A friend of mine bought the ikea KNOXHULT cabinet and didnt want to drill holes in the cabinet door for the handles. So I designed and printed these for him. 
These are friction fit to fit the 16.4mm thick cabinet doors. You can use some double sided tape or shim in a piece of thick paper for a tighter fit.
The models are suffixed with L and R for the relevant side , but you can also interchange the side and apply them vertically instead of horizontal (as suggested in the picture)
I have also added a cura screenshot for the suggested orientation to keep the handle sturdy.
Doesnot need supports, design and orientation takes care of that.

Ikea cabinet handle no drilling or holes required

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

daarshclicks

Achievements

Seedling

Trailblazer

Arrow Bookmark

Spinner tray

"Butterfly" style bread lame with extra supports

Ikea cabinet handle no drilling or holes required