Guide your PTFE tubes with this clip on adapter. Multiple lengths to cater for your needs.

Ender 3 V3 SE/KE PTFE Passthrough Guide

PTFE Guide 25mm.stl

PTFE Guide 50mm.stl

PTFE Guide 75mm.stl

PTFE Guide 100mm.stl

**Simple Spool Holder**

Designed for use somewhere next to your printer. Print in your own colors to tickle your fancy.

Made for 1 Kg spools not exceeding a diameter of 220mm. 

No supports needed in any of the prints. Spool holder might need a brim to keep it in place on the printer (was hot day and crappy filament refused to stick)

**Update (2024/03/11)**
- Updated the spool holders and spool screws to screw in lot better without any struggles
- Added a spacer (Due to happy accident)
- Two versions of each spool holders are available
  - 80mm will require a spacer on each side. Initially printed spool holder too short and made a spacer and ended up liking it a lot
  - 100mm, no spacers required
- Spool screws with a slightly new design and thicker for easier gripping

**Update**
- Updated screw added (Small flat extended by 2mm, screw extended by 10mm)
- Updated bridge (Extended by 20mm)
- Original spool holder removed and replaced with two (Pick your poison)
- Original 29mm outer diameter now called Embrace and extended by 20mm)
- Brand spanking new 50mm outer diameter spool

**Bill Of Materials**
- 3D Printer
- Your favorite rigid filament
- Time

**Frame x 2**
- Layer Height : Just about any layer height that is normally used (0.2 to 0.32)
- Walls : 3+ (You want this strong)
- Infill : 25%+ (Again … strength) (Rectilinear with 25% is tough enough)
- Print Layout : Flat on it's side. Vertically should work but not really recommended

**Bridge x 2**
- Same as frame
- Print Layout : On the long flat side or just the side (latter makes the arches look better)

**Spool Screws x 2**
- Same as frame
- Print Layout : On the big flat disk

**Spool Holder x 1**
- Same as frame
- Print Layout : Standing up
- Might need brim as contact surface to bed is limited

**Notes**
This is version 1.1 and more editions are planned in the future. Feel free to make constructive criticism and comments. Photo of my build will soon be up as cover photo. 

If you wish to use the smaller spool and want some nice grippers and bushes, get the from [Embrace Making's Creality Smooth Spool Holder Upgrade](https://www.printables.com/model/177345-creality-smooth-spool-holder-upgrade)


Simple Spool Holder

Bridge V2.stl

Frame V1.stl

Spool Holder 50mm x 80mm V3.stl

Spool Holder 50mm x 100mm V3.stl

Spacer.stl

Spool Holder Embrace 29mm x 100mm V3.stl

Spool Holder Embrace 29mm x 80mm V3.stl

Spool Screw V3.stl

Filament clipper holder for Ender 3 V3 SE & KE. Left and right versions included.

Filament Cutter Holder - Ender 3 V3 SE & KE

Clipper Holder Right.stl

Clipper Holder Left.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

cytechs.herman

Achievements

Seedling

Explorer

Debutant