Yuffie (Final Fantasy VII) - HueForge Print

Final Fantasy 7 Rebirth drops in 9 days, and so I figured a Yuffie print is kinda relevant and well-timed! This is for those of you out there who are fans of the game, :)

This does use 5 colours, however you potentially could drop the orange and just use brown until it's time to swap to white. This print is also specifically printed in 0.08mm layer heights because I wanted the texture of the mountains to come through a bit more than usual.

3MF will have the colours already loaded in if you're using Bambu. Otherwise, please download the STL and follow the instructions below:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

Filaments Used:

• PLA Kingroon Black Transmission Distance: 0.4
• PLA BambuLab Basic BambuLab Green Transmission Distance: 8
• PLA+ Sunlu Coffee Transmission Distance: 3
• PLA CC3D Orange Transmission Distance: 7.3
• PLA Kingroon White Transmission Distance: 8

Swap Instructions:

• Start with Black
• At layer #9 (0.84mm) swap to BambuLab Green
• At layer #11 (1mm) swap to Coffee
• At layer #15 (1.32mm) swap to Orange
• At layer #16 (1.4mm) swap to White for the rest.

If you'd like my work and would like to support me, you can now subscribe to a Thangs membership plan!

Joining will give you access to a private discord, all paid models, early access to some models as well as a commercial license to sell the physical prints of my models.

If a Thangs Membership is not your thing, I also have a Patreon that gives you the same perks!