Pokemon Starter Choice (Paid) - HueForge Print

An iconic screen for all Pokemon fans, HueForged to 'colour pop' perfection! It definitely took a bit more than the usual image editing (the usual is none, I hate image editing) to get the red to pop like that over the grayscale. But it came out looking great! Pretty simple print, 4 colours, just under two hours this time.

If you need to resize this, remember to resize just the X and Y dimensions, and not the Z!

The 3MF will have all necessary filament swaps already loaded for Bambu Studio/Bambu printers. If you do not want to use that, you can download the STL and use the following print instructions:

Print Instructions Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

Filaments Used:

• PLA Kingroon Black Transmission Distance: 0.4
• PLA+ eSun Grey Transmission Distance: 1.4
• PLA Kingroon White Transmission Distance: 8
• PLA BambuLab Basic Red Transmission Distance: 5

Swap Instructions:

• Start with Black
• At layer #8 (0.76mm) swap to Grey
• At layer #13 (1.16mm) swap to White
• At layer #20 (1.72mm) swap to Red for the rest.

If you'd like to support me, you can now subscribe to a Thangs membership plan!

Joining will give you access to a private discord, all paid models, as well as a commercial license to sell the physical prints of my models.

If a Thangs Membership is not your thing, I also have a Patreon with the same perks!