Here's a shiny Christmas Hueforge ornament (and a print!) for all of you lovely people. REALLY easy one, and I think it took like, under 3 hours for the big print. I used Bambu's Sparkle black in place of normal black to give it some festive cheer - you can do what you want :)
The 3MF files already have the swaps loaded into the file, however if you decide to use the STL files instead, please follow the instructions below! Both the ornament and the print use the same set of swaps and instructions.
Print Instructions Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm
The Model is 163.96x240mm in size You may print at higher layer heights below the Min Depth of 0.44mm The Max Depth is 2mm and the Actual Depth is 2.1mm
Filaments Used:
- PLA BambuLab Sparkle Black Transmission Distance: 0.6
- PLA BambuLab Matte Dark Red Transmission Distance: 1.5
- PLA Kingroon Grey Transmission Distance: 2.5
- PLA Kingroon White Transmission Distance: 5.8 This print uses 4 unique filaments
Swap Instructions:
- Start with Sparkle Black
- At 0.92mm swap to Dark Red
- At 1.32mm swap to Grey
- At 1.56mm swap to White for the rest.
Thank you for STILL sticking with me through my unfortunate, irregular updates. I'm going to have more for you all soon though!!!