tracking pixel
cyanidesugar

Geralt and Yennefer (The Witcher) - Hueforge Print

by
cyanidesugar
Follow
Follow
Remix Model
cyanidesugar
cyanidesugar
|
Image 1 of 3
Geralt and Yennefer (The Witcher) - Hueforge Print 3d model
cyanidesugar
cyanidesugar
|
Image 1 of 3
Geralt and Yennefer (The Witcher) - Hueforge Print 3d model
2D
3D
Makes
Geralt and Yennefer (The Witcher) - Hueforge Print 3d model
Geralt and Yennefer (The Witcher) - Hueforge Print 3d model
Geralt and Yennefer (The Witcher) - Hueforge Print 3d model
This model is restricted by licensing terms. 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6206849.

Never Lost, Always Found.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used: PLA Overture Black Matte Transmission Distance: 3 PLA+ Sunlu Grey Transmission Distance: 2 PLA META Sunlu Red Transmission Distance: 4 PLA Overture Cream Transmission Distance: 3 PLA Sunlu Beige Transmission Distance: 8 PLA+ Sunlu White Transmission Distance: 5

Swap Instructions: Start with Black Matte At layer #12 (1.04mm) swap to Grey At layer #16 (1.36mm) swap to Red At layer #17 (1.44mm) swap to Cream At layer #18 (1.52mm) swap to Beige At layer #24 (2mm) swap to White for the rest.

Your filament settings and mine may differ in TD, so best to adjust yours according to your known TD filaments.


9 Likes14 DownloadsSeptember 9, 2023


9 Likes14 DownloadsSeptember 9, 2023
This model is restricted by licensing terms.