For all you Dr. Who fans - it was recently the 17th anniversary of when the episode 'Blink' aired and it is one of my most favourite episodes of Dr. Who ever!!
Naturally I had to print something to commemorate it.
This print uses 5 filaments, but you can get away with 4 (ignore the beige). But I think the beige really adds to the sand-stone look of the statues, so if you have it, I would highly recommend it!
The 3MF will have all the necessary swaps included as well as a height range modifier to speed up the print for all Bambu Studio users. For non-Bambu users, the STL is there for those who want to use their own settings for the print, just follow the instructions below!
Print Instructions Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm
The Model is 240x159.92mm in size You may print at higher layer heights below the Min Depth of 0.6mm
Filaments Used:
- PLA Kingroon Black Transmission Distance: 0.1
- PLA Chrominal Penumbra Gray Transmission Distance: 6.9
- PLA+ Sunlu Coffee Transmission Distance: 1.8
- PLA TECOR Beige Transmission Distance: 6.3
- PLA Kingroon White Transmission Distance: 5.8
This print uses 5 unique filaments
Swap Instructions:
- Start with Black
- At layer #12 (0.64mm) swap to Penumbra Gray
- At layer #20 (0.96mm) swap to Coffee
- At layer #23 (1.08mm) swap to Beige
- At layer #32 (1.44mm) swap to White for the rest.
Happy printing!