Models related to modifying and utilizing IKEA products.

These are snug-fitting six-section inserts for Ikea's Uppdatera line (2024-25) bin style with side handle cutouts and a slightly sloped down front - the small variant (805.040.49). 

**MODEL DETAILS**
The label panels are mildly recessed to accept 12mm / .5" TZe Brother Labels. Delete the label part of the assembly if you want just the simple separators. All pictures shown were printed with the recommended settings without support.
It is meant to provide a tight friction fit; make sure you press all ends down firmly into the bin to fully seat it into the bin and gaps are minimized at the bottom and outside edges.

**USE NOTES AND ATTRIBUTION**
These were Inspired and remixed from the elegantly useful  [life.of.bda's Uppdatera Box organizer insert for e.g. tea](https://makerworld.com/en/models/1097654-uppdatera-box-organizer-insert-for-e-g-tea#profileId-1092343). That original works great for large packets and pieces where you want the organized items to sit proud above the separator for access - I encourage you to use life.of.bda's model for those use cases.

In practice, I found I needed a version that maximized the height of containment, minimized gaps and shifting. While this isn't liquid tight, once set it can handle very small pieces without spread and stays in place pretty aggressively as long as you don't have any contents that might be small and slim enough to slide into any gaps at the bottom of the bin when it flexes from use.

I've only used Inland PLA+ so far so I can't say for sure, but if liquid-tight was required, then printing in PETG or something else high temp and then running a line of hot glue along the bottom and side ends of the insert to the bin would do quite nicely, especially if you can keep from globing it along the seam so it doesn't drag on sliding parts out.

Uppdatera Small Bin Insert

Uppdatera Small Bin Inserts.3mf

Ikea's Uppdatera line (2024-25) has a bin style with side handle cutouts and a slightly sloped down front in two sizes. They nest quite nicely, are super cheap, and are a great quick option for organizing all manner of things. I use then for organizing printing project parts in different materials or storing Multiboard snaps and connectors.

These brackets fit the small bins versions (805.040.49). The file includes a pair with Multipoint and another using the beefier MultiConnect - [Flush](https://www.printables.com/model/1160115-flush-multiconnect-generic-connector-for-multiboar/files) (recommended) or [Raised](https://www.printables.com/model/1074671-raised-multiconnect-generic-connector-for-multiboa).

I made these to be able to allow bins it to be quickly set and removed as needed (steps 1 & 2 in the pictures), but also mount a bin securely (optional step 3). This allows one to be set and additional bins to be nested in a stack using the first as a base for them. Empty, I've stacked them six high with no concern using the PLA+ settings provided with 3 wall loops.

Uppdatera Multiboard Mounting Brackets

Uppdatera Multiboard Mounting Brackets v2.3mf

IKEA Uses and Hacks

Multiboard Nickel Coin Tool

Multiboard Coin Tool v1.3mf

Bernzomatic Detail Torch Multiboard Holder

Bernzomatic Detail Torch Multiboard Holder.3mf

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

craftingsawdust

Achievements

Voyager

Seedling

Debutant

IKEA Uses and Hacks

Uppdatera Small Bin Insert

Uppdatera Multiboard Mounting Brackets