_This model is for personal use, If you want to support my work and get access to a commercial license you can do so on my [Patreon](https://www.patreon.com/CozyCorner3D)
You can also check up upcoming models on my [Instagram](https://www.instagram.com/cozycorner3d)_

 **V2**
-Changed the position of the brown spots for better printing
-Added quick connector for easier assembly of the spots
-Bigger parts for the face for better printing and easier assembly

Ok the last planter was pretty popular so here is a third one, sorry but I had to do a cat.
It should be quite easy to print and is available in two version, an assembled one (if you don't really care about waste) and a version to assemble yourself.
It should fit most 5cm pots but I’ve added one that you can 3D print if necessary.
Most part should assemble without glue, but for the one that need some I would advise on using CA glue (or 3D gloop if you have access to it).
You don’t need any supports for this print, I’d advise on using adaptative layers Also scaling it up will work.
The example model was printed on an X1, with a 0.4 nozzle and with a no name wood PLA, overture Black, and overture white.
Let me know if you encounter any issue in you prints so I can help you fix it.


Cute Cat planter

cat cut printfile.3mf

_This model is for personal use, If you want to support my work and get access to a commercial license you can do so on my [Patreon](https://www.patreon.com/CozyCorner3D)
You can also check up upcoming models on my [Instagram](https://www.instagram.com/cozycorner3d)_

Who doesn’t love axolotl (I mean if you read this you probably do), they are the cutest things I have ever seen, and I’m saying this just because of [this video](https://www.youtube.com/watch?v=2yVfbc-GEmA). In homage to this I’ve made my second planter a cute axolotl.
It should be quite easy to print and is available in two version, an assembled one (if you don't really care about waste) and a version to assemble yourself.
Most part should assemble without glue, but for the one that need some i would advise on using CA glue (or 3D gloop if you have access to it).
The example model was printed on an X1, with a 0.4 nozzle and with Bambu purple mat (although I would advise on using mat pink), overture Black, and bambu red
Let me know if you encounter any issue in you prints so I can help you fix it


Axolotl planter

Axolotl full.3mf

pot.stl

_This model is for personal use, If you want to support my work and get access to a commercial license you can do so on my [Patreon](https://www.patreon.com/CozyCorner3D)
You can also check up upcoming models on my [Instagram](https://www.instagram.com/cozycorner3d)_

Halloween is still on the way so here is a second model.
I was playing with the drape tool in blender, and I couldn’t resist making a cute ghostcat.
You can customize it with the text of your choice either inside bambu “make my sign” or using the text tool inside orca or prusa slicer (the text panel is 35x20x5mm).
I’ve also made a hidden container, where you can hide your candy or a cute little message.

It should be quite easy to print and is available in two version, an assembled one (if you don't really care about waste) and a version to assemble yourself.
It doesn’t need any supports and I’d advise on using adaptive layers for a better result
Most part should assemble without glue, but for the one that need some i would advise on using CA glue (or 3D gloop if you have access to it).
The example model was printed on an X1, with a 0.4 nozzle and with Bambu orange, overture Black, and overture white.
Let me know if you encounter any issue in you prints so I can help you fix it


ghost cat mini box

ghostcat all parts printfile.3mf

_This model is for personal use, If you want to support my work and get access to a commercial license you can do so on my [Patreon](https://www.patreon.com/CozyCorner3D)
You can also check up upcoming models on my [Instagram](https://www.instagram.com/cozycorner3d)_

I love planters! I love Dragons! And I love cute things!
If you’re like me you’ll adore this cute dragon planter!
It should be quite easy to print and is available in two version, an assembled one (if you don't really care about waste) and a version to assemble yourself.
It should fit most 5cm pots but I’ve added one that you can 3D print if necessary.
Most part should assemble without glue, but for the one that need some i would advise on using CA glue (or 3D gloop if you have access to it).
You don’t need any supports for this print, I’d advise on using adaptative layers Also scaling it up will work.
The example model was printed on an X1, with a 0.4 nozzle and with Bambu green PLA, overture Black, and overture white.
Let me know if you encounter any issue in you prints so I can help you fix it


Dragon planter

Dragon assembled.3mf

This model is for personal use, If you want to support my work and get access to a commercial license you can do so on my [patreon](https://www.patreon.com/CozyCorner3D)

You can also check up upcoming models on my [Instagram](https://www.instagram.com/cozycorner3d/)

For the first model, I wanted to create a really cute pumpkin that could hold the candy for the upcoming Halloween.
It should be quite easy to print and is available in two version, an assembled one (if you don't really care about waste) and a version to assemble yourself.
Most part should assemble without glue, but for the one that need some i would advise on using CA glue (or 3D gloop if you have access to it).

The example model was printed on an X1, with a 0.4 nozzle and with Bambu orange, overture Black, a no name blue and Insanmate wood filled PLA for the branch (But I'd advise on using a regular brown).

Let me know if you encounter any issue in you prints so i can help you fix it



Pumpkin candy bowl

Pumpkin9 multipart printfile.3mf

Pumpkinbody.stl

Pumpkinbranch.stl

Pumpkintop.stl

Candy.stl

Eyeandmouth.stl

Pumpkin Assembled p1 .3mf

Pumpkin Assembled p2 .3mf

Pumpkin Assembled printfile.3mf

dragon eye and mouth.stl

Dragon main body.stl

Dragon spike and belly.stl

Dragon assembled printfile.3mf

Dragon to assemble printfile.3mf

Hi my name is Benoit I’m a small French artist that love to design in 3d cute creatures for it’s girlfriend.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

cozycorner

Achievements

Seedling

Debutant

Pinned models

Pumpkin candy bowl

Dragon planter

Cute Cat planter

Axolotl planter

ghost cat mini box

Dragon planter

Pumpkin candy bowl