Multiboard Snap

Multiboard Side tiles

Multiboard Core Tile

Multiboard corner tiles

Multiboard Dual Snaps (Part A)

remix of the 2.4's upper AB drive parts to make it easier to print at a 0.4 layer height, these will work with the trident as well. this allowed me to get 20K accel on my 2.4 with a printed TAP with the only artifacts being due to a loose mounting of the actual rail.

Standard Voron Settings apart from a 0.6 line width and 0.4 layer height. I'd recommend Gyroid infill to keep it rigid. This needs to be done in ABS or ASA at the very least, but might not be a bad idea to do them in CF PC. PCTG might work for a voron but I don't know for certain. 

Uploaded by Thangs Sync through WINE GE
remix from: https://github.com/VoronDesign/Voron-2 
Standard GPL 3.0 license applies, Thangs just doesn't have a way to select it in their dropdown for it, I have to upload the license...

04 layer height AB drives

A Drive Frame Upper 0.4 layer height.stl

A drive 0.4 layer height.step

B drive 0.4 layer height.step

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5267668.

Remix of: https://www.thingiverse.com/thing:4848888 for my modular case system. So those old cd drives can be used or those adapters off of Amazon or those that you print for more USB and whatnot

Modular case: 1 5.25 inch bay (Part #15)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5263477.

A 4 bay storage spot for all of your drives in your modular case

remix of: https://cults3d.com/en/3d-model/various/4-bay-nas-for-2-5-hdd-or-ssd

modular case: 4 2.5 inch drive bay (Part #11)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5262758.

an adapter for this part: https://cults3d.com/en/3d-model/gadget/2x-hdd-caddy, or the maker's 1x version, for my modular case system.

Modular case: 2.5 inch drive caddy adapter (Part #10)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5261053.

An ATX PSU mount for my modular case system.

Modular case: PSU ATX (Part #13)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5260564.

A 2.5-inch drive mount for my modular case system. So you can show off your SSD with RGB on it (or whatever else takes that mounting form factor)

A remix of this: https://www.prusaprinters.org/prints/106394-pcie-slot-mount-for-25-inch-drive-mounts-to-case-n though I can't find it on Thingiverse, but I recall it being on here.

Modular case: 2.5 inch drive mount (Part #12)

These are the motherboard parts for my modular case system. With this, you can mounter your motherboard on this framework.

For ITX: You'll need just the ITX part (Part #1)
For DTX: You'll need the ITX and DTX parts (Parts #1 and 2)
For M-ATX: You'll need the ITX, DTX, and both M-ATX parts (Parts #1-4)
For ATX: You'll need the ITX, DTX, and both ATX parts (Parts #1-2 and 5-6)
For EATX: You'll need the ITX, DTX, both ATX, and both EATX parts (Parts #1-2 and 5-8)

You'll want to print out some of the motherboard pegs and Frame pegs too to put them together (Parts #9 and (NaN))

Licenced under CC-By-A

Modular case: motherboard (Parts #1-9)

Modular case: motherboard ITX (Part #1)

motherboard_EATX-2 (Part #8)

motherboard_ATX-2 (PART #6)

motherboard_EATX-1 (Part #7)

B Drive Frame Upper 0.4 layer height.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

carolanderson0702

Achievements

Seedling

Voyager

Pinned models

04 layer height AB drives

Multiboard Snap

Multiboard Side tiles

Multiboard Core Tile

Multiboard corner tiles

Multiboard Dual Snaps (Part A)

04 layer height AB drives

Modular case: 1 5.25 inch bay (Part #15)

modular case: 4 2.5 inch drive bay (Part #11)

Modular case: 2.5 inch drive caddy adapter (Part #10)

Modular case: PSU ATX (Part #13)

Modular case: 2.5 inch drive mount (Part #12)

Modular case: motherboard (Parts #1-9)