Updated: Multiboard Push-Fit Bottle Holder
The provided files are designed to securely hold bottles on the Multiboard wall storage system. For maximum flexabilty I have used the Multiboard push-fit remix file to create the Multiboard Tile interface. Therefore it can be attached via "snaps" or other standard Multiboard methods. See here for options.
The parametric Fusion 360 archive file is provided so you can build holder diameters 60mm and above. Below 60mm some fillets will break. Step file also provided for those who do not use Fusion.
It is printed as provided with the standard Multiboard parameters but with tree supports turned on. Printed in eSun PLA+ I have used the bottle holder for successfully storing a number of spray cans.
Credit to Jonathan (KeepMaking) for creating multiboard.
Push-Fits - STEP Multiboard Remixing Files
Push-Fits - STL Multiboard Remixing Files
25 mm Push-Fit Pixel
24 mm Push-Fit Pixel
9 Multiholes Push-Fit Shelf | Multiboard
Multiboard 4x4 Push-Fit Tape Roll Bracket.stl
MultiBoard Push Fit Tool holder
MultiBoard Push-Fit Broom 22mm Holder
Multiboard Primitive - Push-Fit
3mm Push-Fit Multiboard Cable Hanger
MultiBoard Spray Can Holder (Push-Fit Mount)
MultiBoard Push-Fit Broom 25mm Holder
Multiboard 6x6 Push-Fit Double Sided Bracket
Xiaomi Precission Screwdriver Holder for Multiboard - Push Fit
Multiboard 6x4 Push-Fit Double Sided Bracket
MultiBoard Push-Fit 25mm Broom Holder v2
MultiBoard Push-Fit 23mm Broom Holder
Multiboard Push-Fit Shelf for Hoto 3.6V ELECTRIC SCREWDRIVER KIT
MultiBoard Push-Fit 22mm Broom Holder v2
