Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x160mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used: PLA Duramic Brown Transmission Distance: 0.2 PLA Voxel Matte Black Transmission Distance: 0.2 PLA Sunlu chocolate Transmission Distance: 2.8 PLA Bambu matte green Transmission Distance: 0.1 PLA Kingroon Green Transmission Distance: 3.1 PLA sunlu navy blue Transmission Distance: 4 PLA Sunlu White Transmission Distance: 7.7 PLA 3DHOJOR Matte Sky blue Transmission Distance: 0.7 This print uses 8 unique filaments
Swap Instructions: Start with Brown At layer #4 (0.4mm) swap to Matte Black At layer #6 (0.56mm) swap to chocolate At layer #11 (0.96mm) swap to matte green At layer #14 (1.2mm) swap to Green At layer #15 (1.28mm) swap to navy blue At layer #17 (1.44mm) swap to White At layer #26 (2.16mm) swap to Matte Sky blue for the rest.