*You may only use this file for personal purposes, and you are not authorized to sell either the file or any printed items derived from it. If you are interested in a Commercial Use Version without branding and includes extra files and sizes. [You can obtain the Commercial Version by clicking on this link:](https://cults3d.com/en/3d-model/gadget/commercial-version-fidget-bolt-capsule-version)*

*If you find yourself printing a large quantity of these items, we kindly request that you consider donating some of the printed Fidget Bolts to your local charities. These donations are highly valued and can serve meaningful purposes in the community.*

___

**The Fidget Bolt & Capsule was the Design File for Day 7 of [Make It Michael's](https://www.tiktok.com/@makeitmichael)  3d Printing Olympics 2023**

A Free version of this model, Capsule not Included, is available to print on [My Makerworld Page](https://bit.ly/3Ngw15l) 

___

The Fidget Bolt was originally designed by me as a unique creation for the purpose of selling at a Local Craft Show. Upon showcasing it to my friends and family, they were impressed and encouraged me to make the file available to others. This charming toy has broad appeal, appealing to all ages and personalities, and it's particularly popular among neurodivergent individuals who can play with it for hours on end.

The Fidget Bolt features an Embedded Loop that can be utilized for attaching a Keychain or Paracord/Rope. It prints in three pieces requires glue to assemble, prints with no supports! 

Sep 20, 2022 -  Original Version Released

May 23, 2023 - Fidget Bolt Capsule Version! (capsule hole is 19mm x 85mm) Print at 85% to fit American and Canadian Bills inside.

May 28, 2023 - Fidget Bolt Capsule Version with Loose Threads added. (capsule hole is 19mm x 85mm)

August 12, 2023 -  V.2 of Fidget Bolt Capsule Versions added with stronger threads (capsule hole is now 17mm x 95mm)

**Notes:**

The Original Fidget Bolt has been test printed at 60%, 75%, 100% and 200% (See Group Photo).  The tolerances (0.6mm) between 75-200% make this operate fine. However if it is not spinning, I suggest twisting it manually until it has sanded itself down. You can also add some Skateboard Bearing Oil or other lubricants to the tread. (Tip try water too!)

If you print the Capsule file at 85% size, you can roll up some American and Canadian bills to fit inside!

V.1 of The capsule has been test printed down to 70% but please note it may not work for some printers below 80%.

V.2 of the bolt bottoms capsule threads are now stronger! It has been test printed down to 60% successfully!

- - -

**License and Modifying:**

- You are authorized to: Print this item for personal use, give away a printed bolt as a gift, or donate to charity.

- What is not allowed: No Selling, No sharing of files, No Adapting or remixing of my file, no modifying this file with any Text & Logo.

- - -

**Adding Attributions:**

*Printing my item? I would really appreciate it, if you tag me and credit me @bucklenshackle on Socials.*

Please do one or all of the following: Add Buckle N' Shackle, tag my socials @bucklenshackle, add a link to this cults3d page or my website*

- - -


- - -

**Authorized Sellers** For a list of all their socials [Click Here: Authorized Sellers List](https://www.bucklenshackle.com/authorized-sellers)

*Authorized Sellers will be listed on my website when you purchase the commercial license. Please contact me to get your details added.*

- - -
*Printing my item? I would really appreciate it, if you tag me and credit me @bucklenshackle on Socials.*
- - -

**If you are interested in a Commercial Use Version without branding and includes extra files and sizes. [You can obtain the Commercial Version by clicking on this link:](https://cults3d.com/en/3d-model/gadget/commercial-version-fidget-bolt-capsule-version)**


FIDGET BOLT & CAPSULE VERSION - PERSONAL USE

BNS Fidget Bolt - Branded - Personal Use Only.obj

This file is intended for personal use only, the 3d file or a printed model cannot be sold by you. If you use these at your Craft Show/Event tag me on Instagram or Tiktok (@bucklenshackle) I'd love to see them in action!

This is a Shelf Display Rack I created because I needed to display my 3D Printed Items at a local Craft Show. For years I had been using heavy wooden boxes or large pegboard displays.  I needed something that could be taken apart for easier travel. So I created this Shelf Display Rack and I even added Usb Powered Uv Lights underneath to show off Glow in The Dark Prints!

Fits Minimum 220mmx220mm Build Plates. It comes with two files to make a short 2 tier Shelf. Slide in any length of 1x4 Boards to make your own custom shelf. Bottom Shelf uses two boards and the Top Shelf uses 1 Board. There are circle cut outs on the bottom shelf too stick on rubber pads (13.5mm) 

Example in Pics is 36" Long 14.5" Tall (7.5" First Shelf Height)

Bonus: I've included the Clip I made for the Uv Light Bar I used in the pictures.  This light bar is called "Black Light Bar 2 Pack, 10W 1ft USB Portable UV Led Blacklight" on Amazon by greenic or u4glory or any similar brand.

Releases: (Originally Posted on Cults 3d - 2022-11-14)

- Nov 14, 2022 : BNS Display Shelf Single & Double 1x4 and a Bonus Uv Clip.

- Mar 20, 2023 : The Extension (To add a new Middle Tier - 5 total 1x4s will be needed) and I updated the UV Clip (V2) for those that use it to be more sturdy. This new Extension requires a printer with a larger Build Plate as its size is 200x230mm.

Notes: Other files in the pictures are not included

- Prints used in the pictures are from the wonderful artists [Cinderwing3d](https://cults3d.com/en/users/Cinderwing3D/creations),  [LayersinGreen](https://cults3d.com/en/users/LayersInGreen/creations), Poo emoji is from [Dr. Lex](https://github.com/DrLex0/print3d-pile-of-poo-emoji).  Check all of them out!

3D PRINTING SETTINGS
Print in PETG 0.4 Nozzle 0.2/0.4 Layer Height/Width. I used 4 Walls 20% Gyroid Infill and a brim to keep the print from lifting in the corners.

SHELF DISPLAY RACK FOR 1X4 BOARDS

BNS Display Shelf Double 1x4.stl

Meliora3d and Buckle N' Shackle have joined forces for an exciting collaboration! Introducing the Rose Fidget Bolt! Including several stem bolt sizes, leaf and thorn nuts! <a rel="noreferrer" href="https://cults3d.com/en/3d-model/gadget/fidget-screw-bolt-with-keychain-hole">Based on my popular Fidget Bolt you may have seen on Instagram Tiktok and Cults3d.</a> <a rel="noreferrer" href="https://than.gs/m/999863">Now available on Thangs!</a>- - -Looking for a perfect gift for your loved one or Valentine? Consider the Rose Fidget! Simply select a stem size and customize it with as many Leaf or Thorn Nuts as you like. This delightful fidget toy is fun to play with, catering to people of all ages and personalities. It's especially loved by neurodivergent individuals who find endless enjoyment in playing with it for hours.- - -We here at Buckle N' Shackle would like to express our appreciation to Meliora3d for their invaluable contribution to this collaboration, which has brought this delightful creation life! <a rel="noreferrer" href="https://thangs.com/designer/Meliora3D">[Don't forget to explore Meliora3d's awesome collection of 3d models by clicking here.]</a>Purchase Once for lifetime access in this <a rel="noreferrer" href="https://cults3d.com/en/3d-model/gadget/rose-fidget-bolt-collab-meliora3d-bucklenshackle">Cults 3d Listing by Bucklenshackle</a> or you can purchase Monthly <a rel="noreferrer" href="https://thangs.com/designer/Meliora3D">Membership at Meliora3d's Thangs Page</a> and get access to this and all of M3D's Files as long as you are subscribed.<a rel="noreferrer" href="https://bit.ly/3vRtads">A Free file is available on Makerworld!</a>

 Meliora3d and Buckle N' Shackle have joined forces for an exciting collaboration! Introducing the Rose Fidget Bolt! Including several stem bolt sizes, leaf and thorn nuts! Based on my popular Fidget Bolt you may have seen on Instagram Tiktok and Cults3d. Now available on Thangs! - - - Looking for a

Fidget Rose Collab with Meliora3d!

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5865577.

These new Eryone Cardboard spools do work rimless but after many prints I noticed the cardboard started separating. So I made this Spool Rim to protect the cardboard and to offer better grip for your Bambu Lab AMS. 

Note: This currently works with the Two Hole Eryone Spools, the 4 hole spools are slightly smaller and you will need to scale down X and Y to 99% and this should work as intended.

Printed with PETG, 0.4 Nozzle, 6 Walls, Concentric Lines, Standard Speed on a Bambu Lab P1P.

TikTok Video: https://vm.tiktok.com/ZMYBjqHat/

Eryone Cardboard Spool Rim for Bambu Lab AMS

BNS Display Shelf Double 1x4 Extension.stl

BNS Display Shelf Single 1x4.stl

BNS Display Shelf UV CLIP V2 Thicker.stl

BNS Fidget Bolt V.2 - 100mm 3 PIECE CAPSULE VERSION - PERSONAL USE.stl

BNS Fidget Bolt V.2 - 100mm 3 PIECE CAPSULE VERSION LOOSE - PERSONAL USE.stl

BNS Fidget Bolt - 100mm 3 PIECE CAPSULE VERSION - PERSONAL USE.stl

BNS Fidget Bolt - 100mm 3 PIECE CAPSULE VERSION LOOSE - PERSONAL USE.stl

I'm James, a Hard of Hearing Small Business Owner hailing from Scarborough, ON, Canada. My passion for arts, crafts & graphic design has been a lifelong love, particularly when crafting paracord, jewelry, and unique handmade gifts.

These days, you'll spot me proudly showcasing my 3D prints and paracord creations at local Craft Shows across the Greater Toronto Area. Additionally, I create and sell 3D files on my Cults3D Page, boasting over 2k Downloads and 400+ Commercial Sellers! You can explore my authorized sellers page on my website.

https://bio.link/bucklenshackle

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

bucklenshackle3d

Achievements

Seedling

Debutant

Voyager

Designer posts

Fidget Rose Collab with Meliora3d!

Pinned models

Eryone Cardboard Spool Rim for Bambu Lab AMS

SHELF DISPLAY RACK FOR 1X4 BOARDS

FIDGET BOLT & CAPSULE VERSION - PERSONAL USE

FIDGET BOLT & CAPSULE VERSION - PERSONAL USE

SHELF DISPLAY RACK FOR 1X4 BOARDS