Bambu Lab P1P Printable Cable Drag Chain

#ThangsBambuContest

Description

I created a printable cable chain for the p1p as I realize not everyone has access to the cable chain from Amazon that I linked in my other design https://thangs.com/designer/brody.bolanos/3d-model/Bambu%20Lab%20P1P%20Cable%20Drag%20Chain%20Assembly%20-%202%2F8%20Updated-810174?manualModelView=true . There were a few things that I wanted to meet or exceed from the store bought design including a reduction in sagging and lighter weight.

• Chain has a minimum bending radius of 18mm, making sure the wire doesn't get over bent.
• When fully extended ( side with the latches face down) the chain has a slight curve, meaning it wont lay completely flat. This is intentional to make sure the chain wont accidently bend the opposite way.
• Each of my links weigh 1.963g and the cable chain links from amazon weigh 2.160g.
• In the pictures you can see the difference in sagging with the chains fully extended.

Please see PDF file in downloads for instructions.