tracking pixel
braga3d p

Dick Johnson Racing Lightbox LED Lamp

by
braga3dprint
Follow
Follow
Remix Model
braga3dprint
braga3dprint
|
Image 1 of 5
Dick Johnson Racing Lightbox LED Lamp 3d model
braga3dprint
braga3dprint
|
Image 1 of 5
Dick Johnson Racing Lightbox LED Lamp 3d model
2D
3D
Makes
Dick Johnson Racing Lightbox LED Lamp 3d model
Dick Johnson Racing Lightbox LED Lamp 3d model
Dick Johnson Racing Lightbox LED Lamp 3d model
Dick Johnson Racing Lightbox LED Lamp 3d model
Dick Johnson Racing Lightbox LED Lamp 3d model
This model is restricted by licensing terms. 

This lightbox features the iconic Dick Johnson Racing logo, paying tribute to one of the most celebrated teams in Australian motorsport history. A perfect addition for racing fans and collectors, it brings the spirit of the track to life with a bold and striking design. Ideal for displaying in a garage, office, or fan cave.

If you don't have or don't want to install LED's you can just glue the parts together and have an awesome sign!

WARNING!

  • remove purge line at the beginning of the print, it may interfere, specially with bigger prints!

Materials and tools:

  • glue gun
  • aluminum tape
  • led strip: simple 1m or 2m white or rgb led USB (recommended 60 LED per meter)
  • soldering iron (optional)

RECOMMENDATIONS

  • use a textured PEI sheet

  • remove purge line at the beginning of the print!

  • use the print profile, it has quite a few setting changes that help achieve the best results

  • make a hole for the USB strip wherever you like it best with a soldering iron, drill or in the slicer

  • use the aluminum tape on the inside of the backplate to help with light diffusion

  • glue the LED's the further away from the colored design possible; placing them too close ruins the diffusion and the individual LED's become visible

Bambu Studio Settings: I always recommend using the print profile I provided since it has settings with which I've been able to get the best results. If you choose not to here are the main slicer settings I recommend:

  • preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04 to 1.08
  • Quality → Wall generator → Arachne
  • Quality → Wall transitioning threshold angle → 30º to 50º
  • Strength → Advanced → Infill/wall overlap → 20% to 25%
  • Increasing retraction / reducing temperature can help reducing wisps
  • Order color printing from lightest to darkest color

How to make a hole in Bambu Studio: https://www.youtube.com/watch?v=OsA23WCxRtg&t=14s&ab_channel=braga3dprint

Assembly video: https://www.youtube.com/watch?v=QNsShLmXYh0&t=8s&ab_channel=braga3dprint

How to print without AMS: https://www.youtube.com/watch?v=RUSTGxOOS_U&t=4s&ab_channel=braga3dprint


1 Likes0 DownloadsOctober 27, 2024


1 Likes0 DownloadsOctober 27, 2024
This model is restricted by licensing terms.