This is a modular desk organizer that is based on a grid system. The grid can be expanded or shortened depending on your needs. 

Inspiration for this project comes from [Alexandre Chappel](https://www.youtube.com/watch?v=VntGnLuwoeY) and the [Ugmonk Gather desk system](https://ugmonk.com/gather).

There are currently several modules designed for the grid:

- Drawer module
- Phone stand module
- Wallet and cards module
- Keys and coins module
- Post-it and pen module
- USB and dongle module

To keep the design fun and colorful, I recommend printing the base grid in one color and the modules in another.

A single grid piece is 3x5. I recommend printing at least 2 of these grid pieces and supergluing them together. Personally, I have 3 grid pieces.

I have found it best to place a module on the grid pieces to ensure the grids are in-line when gluing them together. Just make sure not to use too much glue and glue the module to the grid.

I also recommend placing anti-slip nubs on the solid, filled in spaces in the grid. I used *[these cheap nubs from Amazon](https://amzn.to/3qq9zuy) and they have worked great.

All of the modules were printed in white PLA with a .15mm layer height and 20% infill. The grid was printed in Prusament Galaxy Black PLA with a .15mm layer height and 20% infill.

*This is an Amazon affiliate link. I earn a small commission at no-cost to you from items purchased using these links.

Modular Desk Organizer System

3x5_grid.stl

Designed to allow a 5.6-5.8mm O/D cable to be clipped to a Rode PSA1 microphone stand.

This is a remix of [this cable clip on Thingiverse](https://www.thingiverse.com/thing:4920852). Credit to [silence1377](https://www.thingiverse.com/silence1337v) for the original design, I just enlarged the cable portion to fit my XLR cable.

**Recommended Print Settings**
I recommend printing at .20mm or .25mm layer height in vase mode. Eliminating any infill and using a single perimeter gives it the flex it needs.

Rode PSA1 Cable Clip

Designed to allow a 5.6-5.8mm O/D cable to be clipped to a Rode PSA1 microphone stand.

This adapter allows you to easily attach cheap rear LED bike lights with roughly a 16x16x2mm base to a rear rack.

I personally use these [rear LED bike lights](https://amzn.to/3FRJMRO) from Amazon.

They are attached with M5 bolts, the length will be relative to your rack's plate. I used M5 12mm button head screws.

My final print was printed with a 0.2mm layer height, 20% infill, and used Prusament PLA filament.

Rear Bike Rack LED Light Adapter

This adapter allows you to easily attach rear bike lights with 2x2mm bases to a rear rack.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

bonniemerqury

Achievements

Seedling

Trailblazer

Modular Desk Organizer System

Rode PSA1 Cable Clip

Rear Bike Rack LED Light Adapter