This is a container for Multiboard. The dimensions are shown in the images for your viewing. I hope you enjoy it and find it useful. You will need to print T-Bolts to secure the container to your Multiboard. I used 13mm flat-head T-Bolts. They are included in the .3mf file but not in the .stl files.

13mm T-Bolt: https://thangs.com/designer/Keep%20Making/3d-model/13%20mm%20Small%20Thread%2C%20Flat%20Head%2C%20T-Bolt-974236 

The Fusion 360 file has been attached for those looking to modify the design.

**Print settings**
Print with container standing up.
Print at your normal Multiboard print settings.
The container shown was printed at 15% cubic infill with a 0.25mm layer height. 

Multiboard - Basic Container

Multiboard - Container Grid Cut out.stl

This is designed to hold the Pittsburg Allen key set from Harbor Freight. I used a weight bearing snap as the attachment method. This is designed to print flat on the print surface.

The Fusion 360 file has been attached for those looking to modify the design. 

**Print Settings**
I recommend printing at your default Multiboard print settings. 
The image shows models printed with 15% cubic infill at a .25mm layer height. 


Multiboard - Pittsburg Allen Key Holder 

allan key holder v3.stl

This is a Multiboard attachment designed to hold 4 rolls of Washi tape. Make sure to print on the side as this piece is designed for this. Print with small thread T-Bolts to secure to your Mulitboard. I used 13mm small thread T-Bolts.

I have included the Fusion 360 .step file for those that would like to edit the design you are welcome to. 

**Print Settings**
Print with your default Multiboard settings. 
I printed at 15% cubic infill with a .25mm layer height. 

Comment if you like the model or would like to see something else! 

Multiboard - Washi Tape Holder - 4 Rolls

Multiboard Tape Holder v1.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

blinkythefish

Achievements

Trailblazer

Seedling

Multiboard - Basic Container

Multiboard - Pittsburg Allen Key Holder

Multiboard - Washi Tape Holder - 4 Rolls