This is a BB tool designed for 41-42mm OD bottom brackets with 16 notches, notably the Shimano SM-BBR60 and 1/2in square drive socket. Suprisingly, even when made out of plastic, this thing works, and tightened several bottom brackets to specification torque without any issues.

Tested with carbon-filled PETG at 100% infill.

Bottom Bracket Tool — 16-Notch 41-42mm OD - Shimano BBR60

BB_tool_41_42mm_16_notch.STL

This is a BB tool designed for 44mm OD bottom brackets with 16 notches, and 1/2in square drive socket. Suprisingly, even when made out of plastic, this thing works, and tightened several bottom brackets to specification torque without any issues.

Tested with carbon-filled PETG at 100% infill.

Bottom Bracket Tool — 16-Notch 44 mm OD - BBT-19.2 - Shimano/SRAM/others

BB_tool_44mm_16_notch.STL

This is a tool for the manual adjustment of the preload screw on Shimano Hollwtech cranks. Similar to Park Tools BBT-10.2

I printed in 100% infill PETG, but its a small force tool so lower infills might work just as well.

Shimano Hollowtech crank preload adjustment key

shimano_preload_key.STL

An easy to use dust wiper press. Only requires a threaded rod through the bottom of the fork for easy installtion

Dust wiper press for 32mm FOX/Rockshox forks 

oilpusher.stl

This is a nifty little cable clip for clipping together a 4mm shifter hose with a 5mm brake line.

Tested with 100% infill PETG.

Bike Brake and Shifter cable clip (4mm shifter, 5mm brake)

cable_twinclip.STL

A replacement cable management clip/bracket for Specialized Epic 2009 . Tested with PETG @ 100% infill.

Specialized Epic 2009-ish cable routing bracket clip

cableclip.STL

Headset Cup press for 34mm bike headsets. Two parts - one to fit in frame, the other to fit in headset cup.

Tested with PETG @ 100% infill.

Headset Cup press for 34mm headsets

headtubepresspt2.STL

The tool uses 2.5mm drill bits as pins to distribute the load. Printed with 100% infill PETG
The bracket uses 2.5mm nails to hold the hub in place (32 spoke wheel) (if you removed the spokes, like i did)

Tool for the removal of DT Swiss star ratchet nut

DTTOOL.STL

This is a 34mm press fit diameter bike headset removal tool. Insert it, find a wooden dowel and hammer the cup out. Another bonus - this wont scratch the inside of your headset tube

Tested on PETG, 100% infill, 0.28mm layer height, 0.4mm nozzle


Bike headset bearing cup removal tool

pusher.STL

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

blahshay

Achievements

Seedling