This is not as simple a model to 3D print as it might seem. Start printing with the ChrBulbExt(without support).stl file, usually problems occur specifically with this one; the part breaks in the base area. I think it's related to the plastic itself and/or the print settings. I recommend using basic filament such as PLA+. Silk/matte filaments are usually less durable.

The ChrBulbExt.stl file is with tree supports, easier to print but support marks will remain.

✅ **enable **“avoid crossing perimeters”

©Personal use only 💀 👉 Check My Patreon and Boosty 👈 Join my Telegram! ⭐💬