🧶🧶🧶

To make a color pattern, you will of course need automatic filament change. I did not use more than 2 colors (for the pattern itself)

For coloring, I select fill and set the maximum Smart fill angle. I specify the needed loops; since it's a separate element, it gets completely filled without touching the others. Gray filament is used for contrast.

I tried both at 100% scale with a layer height of 0.2 mm, and at 75% with a layer height of 0.16 mm.

To make the fabric look even better, I (colored the internal connection)[https://media.printables.com/media/prints/1586283/rich_content/ff28afa0-ff87-4832-b46d-72047f5b895b/1112_5.gif] (the top polygon) to match the top.

I applied adaptive layer height to the layer with loops for a better effect.

©Personal use only 💀♥️ 👉 Check My Patreon and Boosty 👈 Join my Telegram! ⭐💬