#Gridfinity Parametric Lids
1.4K downloads · 4 years ago · This item is for use with the #GridFinity system by Zach Freedman:
[https://www.youtube.com/watch?v
This item is for use with the #GridFinity system by Zach Freedman:
https://www.youtube.com/watch?v=ra_9zU-mnl8
Hey There! Another #Gridfinity add-on! These parametric lids can be sized to any configuration you desire. Simply enter the slotsWide and slotsDeep numbers and like magic you have a lid for any basket or bin or whatever.
A selection of common sizes in STL format included.
These should be printed with the top of the lid flat on the bed.
#Gridfinity Parametric Lids
1.4K downloads · 4 years ago in and
Parametric Gridfinity Small Parts Containment Tray
Gridfinity Box (Parametric)
Gridfinity Toolbox (Parametric)
Rugged Box Gridfinity Parametric.3mf
Gridfinity 4" Thermal Label Dispenser
BIGTREETECH Tool Box
BIQU Tool Box
Two Trees Tool Box
Gridfinity Lids
Gridfinity lid
FreeCAD Gridfinity Parametric Baseplate
JerryRigEverything Knife box with lid (Gridfinity & normal) - Magnetic Version
Gridfinity parametric card game holder in 5 preset sizes
%25208_10_2023%25201_03_55%2520AM.png&w=3840&q=75)
Gridfinity Parametric Drawers
FreeCAD Gridfinity Parametric Storage Bin
Gridfinity basic lid kcup coffee or seed holder
Gridfinity Stackable Lids
FreeCAD Gridfinity Parametric Bin Blank.stl
FreeCAD Gridfinity Parametric Bin Base Blank-Body.stl
Unfortunately the parametrization doesn't work - as soon as I change slotsWide and slotsDeep away from 2x2 the model breaks.
I've opened the given f3d file in Fusion360, but changing the "slotsWide" and "slotsDeep" parameters (eg to 1x1) doesn't work for me (I get errors on fillet and sweep)
Also having this issue
Added Lids v2, but it was just working for me, not sure what is wrong.
I'm just checking it now, sorry I had surgery and I've been away for many months. When I change these parameters it works fine for me. I'll upload a new version of the f3d file to be sure.
I have the same issue. This does not seem to work.
I have the same issue. any solution?
Can you also make one like a zero height bin so it's stackable?
https://thangs.com/designer/bigbrisco/3d-model/%23Gridfinity%20Height%20Adaptive%20Spacers-61820?manualModelView=true
I've seen your design for spacers. I'm looking for a lid with the Gridfinity nesting pattern so I can stack bin-lid-bin-lid.
i will soon get shadowbanned by the algo for writing so many thanks messages in a short time lol.
Would be great if a glass slide could be fitted into the top of lids large enough for it, similar to Zack's design for the glass-fronted boxes, so that you can see the contents from above.
I am a Fusion noob but will see if I can figure it out.
Would be best to just add a sketch on top of the lid size you want and extrude it down to fit the slide, since the slides can't be parametric no reason to make the notch parametric.
I should mention you can adjust the 'height' of the lid as well, if you wanted to for some reason.
Editing the parameters in the latest Fusion 360 I get errors and it does not render. If I change slotsWide I get an error on Fillet2 and Sweep5. These errors persist if I change the values back.